Staffordshire · England
Bath re-enamelling & resurfacing in Barton Gate, Staffordshire
Bath re-enamelling in Barton Gate without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
Get a quote
If you are in Barton Gate and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Bath re-enamelling in Barton Gate without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. If you are dealing with a period or roll-top bath worth keeping and brown or grey marks that don’t clean off, we can help, on acrylic baths, pressed steel baths and Victorian roll-tops alike.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Barton Gate (DE13)
- County
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About Barton Gate
Barton Gate is about 5 miles south-west of Burton upon Trent, in Staffordshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover 512 places in Staffordshire. You can also see our page for Birmingham, about 22 miles away.
All of DE13 is covered, from the main roads to the quietest streets. We regularly work on streets such as Barton Gate and Brick Kiln Lane and the roads around them. With the B5016 close by, Barton Gate is simple for us to get to. Neighbouring places we cover include Barton-under-Needwood (1 mile south-east), Dunstall (1 mile north), Barton Green (1 mile south), Yoxall (2 miles west) and Weaverslake (2 miles west). We also work in nearby towns such as Burton upon Trent (5 miles north-east), Tamworth (10 miles south), Cannock (12 miles south-west), Lichfield (7 miles south-west), Rugeley (8 miles west) and Burntwood (10 miles south-west).
Local landmarks in Barton Gate
Around Barton Gate, we work in homes near Red Lion pub, Thomas Russell Infants School and Church of St James and the streets around them. Barton Gate’s nearest station is Burton-On-Trent station, roughly 4.8 miles north-east of the centre. A little further out are Alrewas and Fradley (2.8 miles south) and Barton Under Needwood Cottage Hospital (0.8 miles south-east). For a walk, there is Brankley Pastures.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
Questions from Barton Gate
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Barton Gate.
Do the materials smell?
Expect a mild smell while we are working.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Nearby places to Barton Gate
Also in Barton Gate
Common problems we fix in Barton Gate
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
If you can see any of these, send us a picture:
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- Several chips and rust patches
What to look for in a quote
- What aftercare is recommended
- A fixed quote, and whether VAT is included
- Whether the price covers travel
- How changes to the job are handled
What we cannot put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Repairing versus replacing in Barton Gate
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Prices start from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Barton Gate
- Honest advice, even when it means no job
- Colour mixed on the day to match
- No extra charge for your area
- Dust sheets down, tidy finish
See our full price list or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- The type of damage
- Doing more than one item at once
- Where the damage is and how we get to it
- The colour and finish to match
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Any details about the material
- A coin beside the damage so we can judge size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Landlord and trade work in Barton Gate
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
