Barnsley · England
Bath re-enamelling & resurfacing in Barugh, Barnsley
Full bath re-enamelling and resurfacing for homes and businesses in Barugh and across Barnsley. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
Bath re-enamelling in Barugh, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on Victorian roll-tops, basins & shower trays and pressed steel baths, and common reasons people contact us are a coloured bath you want in white and a period or roll-top bath worth keeping.
Big or small, you get the same one-year guarantee.
- Area
- Barugh (S75)
- Area hub
- Barnsley
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Store bottles off the bath
- Have chips seen to early
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Our work in Barugh
Barugh is about 2 miles north-west of Barnsley, in Barnsley. Customers in Barugh get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in all 94 towns and villages in Barnsley, from the larger towns to small villages. We work right across the region, from Barugh to Leeds (about 16 miles away).
We cover every part of the S75 postcode area. We regularly work on streets such as Deepdale Croft, Dovebush Way and Norwood Drive. Other places close to Barugh include Barugh Green (1 mile south-west), Higham (1 mile south), Redbrook (1 mile south-east), Darton (1 mile north) and Gawber (1 mile south-east). Larger places within reach include Wombwell (6 miles south-east), Wath upon Dearne (8 miles south-east), Hoyland (6 miles south-east), Worsbrough (4 miles south-east), Cudworth (5 miles east) and Thurnscoe (9 miles east).
Landmarks near Barugh
We visit homes around St Thomas, Penny Pie Park and Church of All Saints and the streets around them. Also close by are Engineers Arms (0.8 miles south-west), Barugh Green Primary School (0.5 miles south-west), Open College of the Arts (0.8 miles east) and Darton College (1.4 miles north-west). Barugh’s nearest station is Darton station, about 1.2 miles north. Other landmarks nearby include Barnsley Hospital (1.4 miles south-east) and Victoria Jubilee Museum (1.9 miles west).
When to call us in Barugh
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Before you book anyone
- Whether there are any call-out or travel charges
- Aftercare advice
- What happens if they find more damage
- What prep work is covered
What bath re-enamelling costs
Prices start from £350. We price every job individually. What matters most is:
- Any earlier repairs that need removing first
- How many areas need work
- Access to the area
- What kind of damage it is
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Any details about the material
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Barugh questions
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
What areas do you cover?
All of Barnsley, and the rest of the UK. Travel is included in the price.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Repairing versus replacing in Barugh
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- One visit for most repairs
- Free fixed quotes from pictures
- Work done at your home or business
- Colours mixed by hand to suit your surface
Take a look at our prices page and resurfacing vs replacement cost guide.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
How it works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Getting a price
If you’re in Barugh and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Also in Barugh
About our accreditations · Every repair comes with a one-year guarantee.
