Barnsley · England
Bath re-enamelling & resurfacing in Gawber, Barnsley
Full bath re-enamelling and resurfacing at your home in Gawber, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- Wear marks under the taps

Work for landlords and builders
If you manage property in Gawber, we will quote for several properties at once. Send pictures for each one and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Bath re-enamelling at your home in Gawber
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on pressed steel baths, basins & shower trays and cast iron baths, and common reasons people contact us are thin, worn enamel in places and lots of chips and rust spots.
We stand behind the work with a one-year guarantee, so you are covered after the visit.

- Location
- Gawber (S75)
- Area hub
- Barnsley
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Gawber. The price comes down to:
- Previous DIY repairs that have to come out
- What the surface is made of
- How many areas need work
- Whether we combine several jobs
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Something in shot to show the size
- The postcode, so we can plan the visit
- Natural light rather than flash
- What it’s made of, if you know
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we’re done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Clear the area around the damage
- Keep children and pets away from the room on the day
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Gawber questions
Can you quote from photos?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Which areas do you work in?
We work UK-wide, and that includes Gawber. Prices do not change with location.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Barnsley.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Gawber and nearby
Gawber is about 1 mile west of Barnsley, in Barnsley. Whether you are in the middle of Gawber or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 94 towns and villages in Barnsley. You can also see our page for Leeds, about 17 miles away.
We work across the S75 postcode area. From Hill Top Lane, Treelands and Limes Avenue or anywhere nearby, a technician can come to you. We also travel to Wilthorpe (1 mile south-east), Redbrook (1 mile north), Pogmoor (1 mile south-west), Higham (1 mile west) and Barugh Green (1 mile north-west). We also work in nearby towns such as Wombwell (5 miles south-east), Wath upon Dearne (7 miles south-east), Hoyland (5 miles south-east), Worsbrough (3 miles south-east), Cudworth (4 miles east) and Thurnscoe (8 miles east).
What’s near Gawber
Our clients here include homes close to Horizon Community College, St Thomas and Open College of the Arts and the streets around them. Also close by are Gawber Primary School (within half a mile south-west) and Penny Pie Park (0.6 miles south). Gawber’s nearest station is Barnsley station, about 1.3 miles east of the centre. Other landmarks nearby include Alhambra Shopping Centre (1.4 miles south-east) and Experience Barnsley (1.1 miles south-east).
Signs you need bath re-enamelling in Gawber
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- Stains that will not shift
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
What to look for in a quote
- A fixed price, and whether VAT is included
- What happens if they find more damage
- Whether there are any call-out or travel charges
- Aftercare advice
Other services in Gawber
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.

