Barnsley · England
Bath Re-enamelling for Barugh Green homes
Bath re-enamelling in Barugh Green without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Respect the curing time we give you
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our bath re-enamelling in Barugh Green
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include brown or grey marks that don’t clean off and chips and rust in more than one place, on cast iron baths, Victorian roll-tops and basins & shower trays.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Barugh Green (S75)
- Region
- Barnsley
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Barugh Green
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the entire item with your S75 postcode.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Do you cover the whole of Barnsley?
Across the UK. Our prices are the same everywhere.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
How long is the bath unusable?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About Barugh Green
Barugh Green is about 2 miles west of Barnsley, in Barnsley. Jobs in Barugh Green are booked in like any other job: a fixed quote from photos, then a visit to do the work. Barugh Green is one of 94 towns and villages in Barnsley we cover. Our jobs stretch from Barugh Green to Leeds (about 17 miles away).
All of S75 is within our area. That includes homes on Milne Street, Longley Street and St John's Avenue and the roads around them. Neighbouring places we cover include Higham (1 mile south), Barugh (1 mile north-east), Redbrook (1 mile east), Gawber (1 mile south-east) and Pogmoor (1 mile south-east). Larger places within reach include Wombwell (6 miles south-east), Wath upon Dearne (8 miles south-east), Hoyland (6 miles south-east), Worsbrough (3 miles south-east), Cudworth (5 miles east) and Thurnscoe (9 miles east).
Near you in Barugh Green
Locally, our jobs take us to homes close to Penny Pie Park, Open College of the Arts and St Thomas, among other places. You will also find Engineers Arms (less than half a mile south), Horizon Community College (1.5 miles south-east) and Barugh Green Primary School (within half a mile west). For rail, the closest station is Darton station, about 1.5 miles north of the centre. Well-known places in the area include Victoria Jubilee Museum (1.8 miles west) and Alhambra Shopping Centre (2.4 miles south-east).
Other services in Barugh Green
When to call us in Barugh Green
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Look out for these signs:
- A dull, rough surface that won’t come clean
- Several chips and rust patches
- Worn patches where water runs and sits
- A roll-top that is seen better days
Comparing quotes
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- What preparation is included
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Barugh Green. The price reflects:
- The type of damage
- Unusual colours or finishes
- How much damage there is
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send pictures for a quote
Photographing the damage takes a minute. Please include:
- Something in shot to show the size
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the following day.
Preparing for the visit
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
How to get a price
Email us a picture of the damage and a wider shot of the entire item, with your S75 postcode, and we will reply with a fixed price.
Read more
Honest limits
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- Colour mixed on the day to match
- Every repair guaranteed for a year
Read our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
