Somerset · England
Bath re-enamelling & resurfacing in Barwick, Somerset
Bath re-enamelling in Barwick without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Stains that will not shift
- A peeling or bubbling previous coating
When to call us in Barwick
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Most people contact us after spotting something like this:
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Before you book anyone
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- How long the guarantee is and what it covers
- How long it needs to cure
Bath re-enamelling in Barwick, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a bath in a colour that no longer suits and staining under the taps and around the waste, we can normally put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Barwick (BA22)
- Region
- Somerset
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Barwick
What else we do in Barwick
Honest limits
It helps to know what we cannot do:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
FAQs for Barwick
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
How do I get a price for bath re-enamelling in Barwick?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Covering Barwick
Barwick is about 2 miles south-east of Yeovil, in Somerset. Jobs in Barwick are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Barwick is one of 640 towns and villages in Somerset we cover.
Our repair technicians cover all of the BA22 postcode area. Local streets include Whitcross, Mowleaze and Fairhouse Road, all of which we cover. Close by, we cover Stoford (1 mile east), Lower Key (1 mile west), Clifton Maybank (1 mile east), Nash (1 mile west) and East Coker (1 mile south-west). Further out, we also cover Chard (15 miles west), Street (15 miles north), Crewkerne (8 miles west), Wincanton (13 miles north-east), Somerton (11 miles north-west) and Ilminster (13 miles west).
Landmarks near Barwick
We visit homes around The Royal Oak pub, Ninesprings and Preston School Academy and the streets around them. You will also find Church of Saint Mary Magdalene (less than half a mile north-west) and Barwick and Stoford Community Primary School (under half a mile north-west). Barwick’s nearest station is Yeovil Junction station, roughly 0.7 miles north-east. A little further out are Yeovil Hospital (1.9 miles north) and Country Life Museum (2.9 miles north-west). Open spaces near Barwick include Babylon Hill.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Landlord and trade work in Barwick
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
For anyone letting property in or around Barwick, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which generally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- Whether we combine several jobs
- How many areas need work
- What kind of damage it is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Natural light rather than flash
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs immediately
- Store bottles off the bath
- Avoid suction-cup mats
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
