Somerset · England
Bath re-enamelling & resurfacing in Nash, Somerset
Full bath re-enamelling and resurfacing for homes and businesses in Nash and across Somerset. Send photos for a free, fixed quote.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
Bath re-enamelling at your home in Nash
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, Victorian roll-tops and pressed steel baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and lots of chips and rust spots.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Nash (BA22)
- County
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Wash away dyes and oils after use
- Repair dripping taps early
- Never use suction bath mats
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Acrylic that moves when you stand in it
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Work for landlords and builders
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Towns and villages near Nash
More services for Nash
Repair or replace in Nash?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- One price list for the entire UK
- Most jobs done in one visit
Take a look at our full price list or resurfacing vs replacement cost guide.
About Nash
Nash is about 2 miles south of Yeovil, in Somerset. Customers in Nash get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover 640 places in Somerset.
All of BA22 is covered. Other places close to Nash include Burton (1 mile west), North Coker (1 mile south-west), Holywell (1 mile west), East Coker (1 mile south) and Lower Key (1 mile east). Larger places within reach include Chard (14 miles west), Street (15 miles north), Crewkerne (7 miles south-west), Wincanton (14 miles north-east), Somerton (10 miles north) and Ilminster (11 miles west).
What’s near Nash
Typical jobs here are in homes near East Coker Community Primary School, The Foresters Arms and Preston School Academy and the streets around them. Also close by are Holy Trinity Church and Community Centre (0.9 miles north) and Ninesprings (1.4 miles north-east). For rail, the closest station is Yeovil Junction station, roughly 1.9 miles east. Further afield, we also cover the area around Yeovil Hospital (1.9 miles north-east) and Country Life Museum (1.7 miles north-west). Not far away are Abbot's Hill.
The process
The work is clean and fairly quiet. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Get a quote
Upload a picture of the damage and one of the whole item, with your BA22 postcode, and we will reply with a fixed price.
Read more
Questions from Nash
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item with your BA22 postcode.
Do you cover Nash?
Yes. We cover the entire UK and come to Nash and the rest of Somerset. Send us photos for a fixed quote, or call 0345 017 0787.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Signs you need bath re-enamelling in Nash
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
The most common problems we’re called about are:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Brown or grey marks that don’t clean off
What to look for in a quote
- Whether the colour is mixed to match
- Whether the price covers travel
- What protection goes down before work starts
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
