Cheshire East · England
Bath re-enamelling & resurfacing in Basford, Cheshire East
Bath re-enamelling in Basford without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
Bath re-enamelling at your home in Basford
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We regularly repair cast iron baths, basins & shower trays and acrylic baths, and common reasons people contact us are lots of chips and rust spots and brown or grey marks that don’t clean off.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Basford (CW2)
- Region
- Cheshire East
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Work for landlords and builders
We work for landlords, letting agents and housing providers in Basford as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Repair or replace in Basford?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Basford
- A fixed quote before you book
- A year’s guarantee on all work
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our prices page or bath cost comparison.
More services for Basford
Your questions about bath re-enamelling in Basford
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow a full day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Let us know about parking or access
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
Getting a price
Most customers in Basford get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Keeping it looking good
So the finish stays in good condition for years:
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Don’t leave a chip unrepaired
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
When to call us in Basford
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
People generally call us when they notice something like this:
- An original cast iron bath that needs restoring
- Stains that will not shift
- An old resurfacing that’s failing
- Wear marks under the taps
What to look for in a quote
- What preparation is included
- How the room is protected while they work
- Aftercare advice
- Whether there are any call-out or travel charges
About Basford
Basford is about 2 miles south-east of Crewe, in Cheshire East. Anywhere in CW2, we carry out the work at your property. We cover all 254 towns and villages across Cheshire East, from the larger towns to small villages. Our jobs stretch from Basford to Manchester (30 miles away).
Our visits in CW2 work the same way as everywhere else we cover. Whether you live on Weston Lane and Back Lane or anywhere nearby, a technician can come to you. Close by, we cover Hough (1 mile south), Shavington (1 mile west), Weston (1 mile south-east), Stowford (1 mile north-east) and Rope (2 miles west). Within a short drive, we also cover Congleton (11 miles north-east), Nantwich (4 miles west), Middlewich (8 miles north), Sandbach (6 miles north-east), Coppenhall (3 miles north) and Holmes Chapel (10 miles north).
Local landmarks in Basford
Typical jobs here are in homes near Shavington Primary School, Shavington Academy and St Mark. Basford’s nearest station is Crewe station, roughly 1.6 miles north of the centre. Nearby you’ll also find Englesea Brook Chapel and Museum of Primitive Methodism (2.3 miles east) and Nantwich Castle (4 miles west). Open spaces near Basford include Black Firs and Cranberry Bog.
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Basford. The price comes down to:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The material and finish
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Natural light rather than flash
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
