Cheshire East · England
Bath re-enamelling & resurfacing in Chorlton, Cheshire East
Full bath re-enamelling and resurfacing for homes and businesses in Chorlton and across Cheshire East. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place

For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
How we handle bath re-enamelling in Chorlton
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair acrylic baths, cast iron baths and pressed steel baths, and common reasons people get in touch are a roll-top that’s seen better days and brown or grey marks that don’t clean off.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

- Location
- Chorlton (CW2)
- County
- Cheshire East
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Chorlton?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Send us a picture if you notice any of these:
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
- A peeling or bubbling previous coating
Questions to ask before you book
- When it can be used again
- Aftercare advice
- Whether the colour is mixed to match
- What happens if they find more damage
Where we work around Chorlton
Chorlton is about 4 miles south-east of Crewe, in Cheshire East. Clients in Chorlton get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 254 towns and villages in Cheshire East, from the larger towns to small villages. You can also see our page for Manchester, about 31 miles away.
Postcode districts we cover here: CW2. We regularly work on streets such as Freshwater Drive, Waybutt Lane and Hampstead Drive and the roads around them. Nearby, we also work in Weston (1 mile north), Hough (1 mile north-west), Blakenhall (1 mile south), Basford (2 miles north-west) and Walgherton (2 miles west). Within a short drive, we also cover Crewe (4 miles north-west), Congleton (12 miles north-east), Nantwich (5 miles west), Middlewich (10 miles north), Sandbach (7 miles north) and Coppenhall (5 miles north-west).
Around Chorlton
For rail, the closest station is Crewe station, roughly 3.2 miles north. Other landmarks nearby include Nantwich Workhouse (5.3 miles north-west) and Heighley Castle (3.2 miles south-east). The countryside around Chorlton includes Black Firs and Cranberry Bog.
- Local facilities include Checkley cum Wrinehill (2.2 miles south)
Towns and villages near Chorlton
Also in Chorlton
Chorlton questions
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote with dates.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Avoid suction-cup mats
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Do not leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What a repair cannot fix
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Chorlton
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
The process
We agree an arrival time beforehand. Once we’re there, the work takes most of the day for most jobs. We leave the room clean.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Let us know if it has been repaired before
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- Whether we combine several jobs
- How hard the colour is to match
- How much damage there is
- Previous DIY repairs that have to come out
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- Where you are, by postcode
- What it’s made of, if you know
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.

