Cumbria · England

Bath Re-enamelling in Bassenthwaite

Bath re-enamelling for Bassenthwaite, without a refit. Get a fixed price from your photos, then book a visit.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Bassenthwaite

Bath re-enamelling in Bassenthwaite without replacing anything

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair pressed steel baths, basins & shower trays and acrylic baths, and the jobs we see most are a dull, rough surface that won’t come clean and several chips and rust patches.

Your repair is guaranteed for a year, as with every job we do.

Where
Bassenthwaite (CA12)
Region
Cumbria
Warranty
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Aftercare tips

How the surface is treated afterwards matters:

  • Do not leave bottles, razors or sponges standing on the surface
  • Rinse off hair dye, oils and bath bombs right away
  • Don’t use the bath until it has fully cured
  • Never use suction bath mats

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Do you need bath re-enamelling in Bassenthwaite?

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Most people get in touch when they notice something like this:

  • A coloured bath you want in white
  • Worn patches where water runs and sits
  • A period or roll-top bath worth keeping
  • An old resurfacing that is failing

Comparing quotes

  • Whether cleaning and preparation are in the price
  • Who turns up on the day
  • Is the price fixed, and does it include VAT?
  • Whether the colour is mixed to match

How to compare quotes

Work for landlords and builders

We work for landlords, letting agents and housing providers in Bassenthwaite as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Repairing versus replacing in Bassenthwaite

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Why us?

  • No need to remove anything
  • Colour-matched on site
  • CHAS, Constructionline and SafeContractor accredited
  • Most jobs done in one visit

Take a look at our full price list or bath cost comparison.

FAQs for Bassenthwaite

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Can you quote from photos?

Usually, yes. Clear photos let us give you a fixed quote without visiting.

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

What if the damage is worse than the photos show?

Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

Do you come to Bassenthwaite?

We do. We send a technician to Bassenthwaite for every job, with no extra charge for travel.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

How we price bath re-enamelling

Resurfacing from £350. We price every job individually, from your photos. What matters most is:

  • The colour and finish to match
  • How many areas need work
  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Your postcode, so we can check dates

Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Bassenthwaite, and we’ll come back with a fixed quote.

Covering Bassenthwaite

Bassenthwaite is about 15 miles east of Workington, in Cumbria. Customers in Bassenthwaite get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Bassenthwaite is one of 438 places in Cumbria where we work. Our jobs stretch from Bassenthwaite to Newcastle upon Tyne (66 miles away).

Our repair technicians cover all of CA12. If you are just outside Bassenthwaite, we cover Applethwaite (5 miles south-east), Ormathwaite (5 miles south-east), Braithwaite (5 miles south), Cumberland (6 miles south) and Portinscale (6 miles south). Further out, we also cover Workington (15 miles west), Maryport (12 miles west), Cockermouth (7 miles west), Moorclose (14 miles west), Wigton (10 miles north) and Seaton (13 miles west).

What’s near Bassenthwaite

Our clients here include homes close to Bassenthwaite Primary School and St John's Church. For a walk, there’s Little Tarn and Little Cockup.

Map of Bassenthwaite © OpenStreetMap contributors

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We clean up when we’re done and tell you when it’s ready to use.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can typically be used the next day.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Make sure the area is dry
  • Have a window or extractor fan available

Getting a price

The quickest way to a price is to send two or three photos using our quote form or call us. We’ll say right away if a repair is the right fix.

Get a free quote

Advice

When a repair is not the answer

We’ll always be straight with you, so here’s what a repair can’t fix:

  • A metal bath with a through crack
  • Problems we can’t see until an old finish comes off
  • An acrylic bath that flexes badly underfoot

If in doubt, send pictures and we will say what we think.

What we work on

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.