Cumbria · England
Bath re-enamelling & resurfacing in Seaton, Cumbria
Full bath re-enamelling and resurfacing at your home in Seaton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- How many items we do on one visit
- Where the damage is and how we get to it
- What kind of damage it is
- The material and finish
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send photos for a quote
Phone photos are fine. Ensure they show:
- Your postcode, so we can check dates
- What it’s made of, if you know
- Any earlier repairs or coatings
- A close-up of the damage, in focus
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
About our bath re-enamelling in Seaton
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s lots of chips and rust spots and enamel that’s lost its shine and feels rough, we can generally put it right, on acrylic baths, basins & shower trays and cast iron baths alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Where
- Seaton (CA14)
- County
- Cumbria
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Seaton
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
For anyone letting property in or around Seaton, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Keeping it looking good
How the surface is treated afterwards matters:
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Other services in Seaton
About Seaton
Seaton is about 2 miles north-east of Workington, in Cumbria. Clients in Seaton get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We work in all 438 towns and villages in Cumbria, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 79 miles away.
Postcode districts we cover here: CA14. You’ll find streets such as Park Avenue, Quality Corner and Ling Beck Park, all of which we cover. If you’re just outside Seaton, we cover Siddick (1 mile west), Stainburn (1 mile south), Barepot (1 mile south), Flimby (2 miles north) and Workington (2 miles south-west). We also work in nearby towns such as Whitehaven (9 miles south), Maryport (4 miles north), Cockermouth (7 miles east), Cleator Moor (10 miles south), Bransty (8 miles south) and Egremont (12 miles south).
What’s near Seaton
In Seaton, that means homes near St Paul's, Workington Academy and Northside Primary School, among other places. Seaton’s nearest station is Workington station, about 1.7 miles south-west. Other landmarks nearby include Dunmail Park (1.1 miles west) and Workington Transport Heritage Trust (0.8 miles south-west). The countryside around Seaton includes Siddick Pond.
Honest limits
Before booking, it’s worth knowing the limits too:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
What we’re called out for in Seaton
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Staining under the taps and around the waste
What your quote should include
- How to care for the finish
- Whether a trained technician does the job
- When it can be used again
- How your room will be protected
Questions from Seaton
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How much does bath re-enamelling cost in Seaton?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
What happens on the day
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes a full day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
Before we arrive
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Read more
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Seaton customers choose us
- Dust sheets down, tidy finish
- Generally one visit, start to finish
- One price list for the whole UK
- Nothing taken out or refitted
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
