Hampshire · England
Bath Re-enamelling in Battramsley
Our repair technicians come to Battramsley for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
How we handle bath re-enamelling in Battramsley
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We are often asked to fix a bath that stays dull however much you clean it and a coating lifting around the plughole, on Victorian roll-tops, basins & shower trays and acrylic baths.
Every repair is covered by our one-year guarantee.
- Location
- Battramsley (SO41)
- County
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us if there are stairs or a lift
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
Places near Battramsley
What else we do in Battramsley
What we are called out for in Battramsley
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
The things clients generally mention when they call are:
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Stains that won’t shift
- A coating lifting around the plughole
Before booking anyone
- Who will actually do the work
- How to care for the finish
- What prep work is covered
- Whether they match the colour on site
Battramsley and nearby
Battramsley is about 2 miles north of Lymington, in Hampshire. Jobs in Battramsley are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in 683 places across Hampshire. You can also see our page for London, about 80 miles away.
Our technicians cover all of SO41 and the streets around it. Close by, we cover Sandy Down (1 mile north), Boldre (1 mile south-east), Mount Pleasant (1 mile south-west), Warborne (1 mile south-east) and Pilley (1 mile east). Larger places within reach include Totton (9 miles north), Hedge End (14 miles north-east), Romsey (15 miles north), Hythe (9 miles north-east), New Milton (5 miles south-west) and Ringwood (10 miles north-west).
Around Battramsley
We visit homes around William Gilpin Church of England Primary School, The Hobler Public House and Priestlands School and the streets around them. Nearby too are Southlands School (1.4 miles south-east) and Church of St John (1 mile east). For rail, the closest station is Sway station, roughly 2 miles west of the centre. Well-known places in the area include Lymington New Forest Hospital (1.5 miles south-east) and St Barbe Museum and Art Gallery (2.2 miles south-east). The countryside around Battramsley includes Boldre Foreshore.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Should you replace it?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- Colour-matched on site
- One price list for the entire UK
Read our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
When we would advise against a repair
It helps to know what we cannot do too:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before booking. We look at:
- The size and number of damaged areas
- What kind of damage it is
- Previous DIY repairs that have to come out
- What the surface is made of
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Getting a price from pictures
Phone photos are fine. Make sure they show:
- The material, if you know it
- Something in shot to show the size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Questions from Battramsley
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Battramsley?
We do. Repair technicians travel to Battramsley from across the region, and the price is the same as everywhere else.
Aftercare tips
Simple care helps the repair last. We recommend:
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
