Hampshire · England
Bath Re-enamelling for Warborne homes
Bath re-enamelling in Warborne without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Warborne. The price comes down to:
- What the surface is made of
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How hard the colour is to match
We charge the same wherever you are, so there is no premium for Warborne. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Bath re-enamelling at your home in Warborne
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s chips and rust in more than one place and staining under the taps and around the waste, we can generally put it right, on basins & shower trays, pressed steel baths and Victorian roll-tops alike.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Warborne (SO41)
- County
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Warborne
Also in Warborne
Warborne and nearby
Warborne is about 1 mile north of Lymington, in Hampshire. Clients in Warborne get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Warborne is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Warborne to London (about 80 miles away).
Our visits in SO41 work the same way as everywhere else we cover. Neighbouring places we cover include Pilley (1 mile north-east), Boldre (1 mile north-west), Portmore (1 mile east), Pilley Bailey (1 mile north-east) and Bull Hill (1 mile north-east). Further out, we also cover Totton (10 miles north), Hedge End (14 miles north-east), Romsey (15 miles north), Hythe (8 miles north-east), New Milton (5 miles west) and Ringwood (12 miles north-west).
What’s near Warborne
Locally, our jobs take us to homes close to William Gilpin Church of England Primary School, Walhampton Arms and Priestlands School and the streets around them. Also close by are Southlands School (less than half a mile south-west) and Saint Nicholas Chapel (0.5 miles north-east). Warborne’s nearest station is Lymington Town station, about 1 mile south. Well-known places in the area include St Barbe Museum and Art Gallery (1.2 miles south) and Lymington New Forest Hospital (0.5 miles south-west). Open spaces near Warborne include Boldre Foreshore.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
FAQs for Warborne
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Warborne.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Signs you need bath re-enamelling in Warborne
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People typically call us after spotting one of these:
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
Questions to ask before you book
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
- How your room will be protected
- How changes to the job are handled
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Free fixed quotes from pictures
- One price list for the entire UK
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
See our prices page and guide to resurfacing and replacement costs.
Looking after it afterwards
So the finish stays in good condition for years:
- Do not use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What a repair cannot fix
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
If in doubt, send photos and we will say what we think.
Materials we work on in Warborne
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Make sure the area is dry
- Clear the area around the damage
- Have a window or extractor fan available
Get a quote
Email us a picture of the damage and one of the entire item, and tell us you are in Warborne, and we’ll reply with a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
