Blaenau Gwent · Wales

Bath Re-enamelling in Beaufort Hill

We travel to Beaufort Hill for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Beaufort Hill

About our bath re-enamelling in Beaufort Hill

We don’t move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the following day. Whether it’s stains that won’t shift and a coating lifting around the plughole, we can normally put it right, whatever the material.

A one-year guarantee comes as standard, so you’re covered after the visit.

Area
Beaufort Hill (NP23)
Region
Blaenau Gwent
Cover
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Covering Beaufort Hill

Beaufort Hill is about 1 mile north-east of Ebbw Vale, in Blaenau Gwent. We travel to customers in Beaufort Hill and nearby villages, so you do not need to take anything anywhere. We work in 56 places in Blaenau Gwent, from the larger towns to small villages. You can also see our page for Birmingham, about 72 miles away.

Our repair technicians cover all of NP23 and the streets around it. From Big Lane, Frost Road and Bangor Road or a nearby road, a technician can come to you. With the A4047 close by, Beaufort Hill is easy for our repair technicians to reach. We also cover the places around Beaufort Hill: Winchestown (1 mile south-east), Brynmawr (1 mile east), Nantyglo (2 miles south-east), Coalbrookvale (2 miles south-east) and Tŷ-llwyn (2 miles south). Larger places within reach include Abertillery (5 miles south-east), Blaenau Gwent (5 miles south-east), Penrhiwgarreg (6 miles south-east), Pen-y-bont (5 miles south-east), Rhymney (4 miles south-west) and Llanhilleth (7 miles south).

Landmarks near Beaufort Hill

In Beaufort Hill, that means homes near Glyncoed Comprehensive School, Rehoboth Congregational Church and Beaufort Hill Primary School. Nearby too are The Cendl Inn (within half a mile north) and Market Hall Cinema (1 mile east). The closest station to Beaufort Hill is Ebbw Vale Town station, about 1.3 miles south. Other landmarks nearby include Garn Coch Motte (4.5 miles north-east) and Ebbw Vale Works Museum (1.3 miles south). The countryside around Beaufort Hill includes Bryn-serth and Winchestown lake.

Map of Beaufort Hill © OpenStreetMap contributors

What bath re-enamelling costs

Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:

  • How much damage there is
  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • The material

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed quote

Before you send pictures, these tips help us give you a firm price:

  • The material, if you know it
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings
  • Where you are, by postcode

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Your questions about bath re-enamelling in Beaufort Hill

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is there a smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Do you cover the whole of Blaenau Gwent?

We work UK-wide. Prices do not change with location.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How durable is a resurfaced bath?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

How to look after the repair

Much of the damage we repair could have been avoided. These habits help:

  • Use washing-up liquid and a soft cloth
  • Keep suction mats out of the bath
  • Wash away dyes and oils after use
  • A quick wipe after use keeps limescale away

Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.

Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

Do you need bath re-enamelling in Beaufort Hill?

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

You may need us if you’ve spotted any of these:

  • An outdated colour you’d like to change
  • Worn patches where water runs and sits
  • Brown or grey marks that don’t clean off
  • Enamel that’s lost its shine and feels rough

Questions to ask before you book

  • What the guarantee covers, and for how long
  • How to care for the finish
  • How changes to the job are handled
  • Is the price fixed, and does it include VAT?

How to compare quotes

Repair or replace in Beaufort Hill?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why us?

  • One visit for most repairs
  • Fixed prices from your photos
  • No need to remove anything
  • We’ll tell you if it’s not worth repairing

Take a look at our prices page and guide to resurfacing and replacement costs.

What we do, step by step

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. The bath is left to cure and can normally be used the day after.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Tell us if there are stairs or a lift
  • Let the surface dry out before the visit

Get a quote

Most customers in Beaufort Hill get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.