Bristol · England

Bath re-enamelling & resurfacing in Bedminster Down, Bristol

Fixed-price bath re-enamelling in Bedminster Down and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Bedminster Down?

Bath re-enamelling in Bedminster Down without replacing anything

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with a coating lifting around the plughole and chips and rust in more than one place, we can help.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.

Where
Bedminster Down (BS13, BS3, BS4)
Region
Bristol
Cover
12 months on all our work
Quotes
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

When a repair is not the answer

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • A metal bath with a through crack
  • Leaking taps or wastes (a plumber’s job)
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we’ll say what we think.

Materials we work on in Bedminster Down

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Landlord and trade work in Bedminster Down

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Landlords, letting agents and housing providers in Bedminster Down use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Bedminster Down and nearby

Bedminster Down is about 1 mile south of Bedminster, in Bristol. Clients in Bedminster Down get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Bedminster Down is one of 89 towns and villages in Bristol we cover. Our jobs stretch from Bedminster Down to Birmingham (about 78 miles away).

Here we cover the BS13, BS3 and BS4 postcode area. Local streets include Vale Lane, Lewis Road and Garth Road, and we cover them all. With the A3029 close by, Bedminster Down is simple for us to get to. Neighbouring places we cover include Ashton Vale (1 mile north-west), The Chessels (1 mile north), Bishopsworth (1 mile south-west), Bedminster (1 mile north) and Ashton Gate (1 mile north). Larger places within reach include Montpelier (3 miles north), Easton (3 miles north-east), Cotham (3 miles north), Whitehall (4 miles north-east), Redfield (3 miles north-east) and St Pauls (3 miles north-east).

Landmarks near Bedminster Down

Typical jobs here are in homes near Cheddar Grove Primary School, Church of St Oswald and Merrywood Grammar School. Also close by are Greville Smyth Park (1.2 miles north) and Bedminster Down School (less than half a mile south-west). The nearest railway station is Parson Street station, roughly 0.5 miles north. A little further out are The Galleries (2.3 miles north-east) and National Lifeboat Museum (1.6 miles north). Not far away are Brandon Hill.

  • Parks and local facilities nearby include Avon (2.1 miles north-east)
Map of Bedminster Down © OpenStreetMap contributors

How to look after the repair

Once the work has cured, treat it gently:

  • Keep toiletries on a shelf rather than in the bath
  • Do not leave a chip unrepaired
  • Do not let dyes or oils sit on the finish
  • Repair dripping taps early

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

FAQs for Bedminster Down

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you work in Bedminster Down?

Yes. We work across the UK and travel to Bedminster Down. Send pictures and we will quote, or call 0345 017 0787.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Can you fix a peeling bath coating?

Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.

What happens once I’ve sent pictures?

You’ll get a fixed quote back, typically with dates to choose from. There is no obligation to book.

How much does bath re-enamelling cost in Bedminster Down?

Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

What we do, step by step

The work is clean and fairly quiet. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Let us know about parking or access
  • Open a window if you can
  • Plan for the room to be out of bounds to pets and children

Getting a price

To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Advice

Repairs by material

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Prices and what affects them

Prices start from £350. Quotes are free and the price is fixed. What we look at:

  • How many areas need work
  • What kind of damage it is
  • The material
  • How hard the colour is to match

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • One sharp close-up of the damage
  • Any details about the material
  • A picture taken from further back
  • A coin beside the damage so we can judge size

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.

Do you need bath re-enamelling in Bedminster Down?

Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.

It’s worth getting a quote if you see:

  • A peeling or bubbling previous coating
  • A dull, rough surface that will not come clean
  • An outdated colour you’d like to change
  • Staining under the taps and around the waste

Questions to ask before you book

  • Whether the price is fixed and includes VAT
  • How your room will be protected
  • What aftercare is recommended
  • Whether a trained technician does the job

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.