Herefordshire · England
Bath re-enamelling & resurfacing in Bellamore, Herefordshire
We travel to Bellamore for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that is failing
Bath re-enamelling in Bellamore without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and people most often call us about several chips and rust patches and enamel that’s lost its shine and feels rough.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- Bellamore (HR2)
- Area hub
- Herefordshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Bellamore
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Send us a picture if you notice any of these:
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
Comparing quotes
- How the room is protected while they work
- What prep work is covered
- How long the guarantee is and what it covers
- Who will actually do the work
Common questions in Bellamore
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How to care for the repair
Simple care helps the repair last. Our advice:
- Repair dripping taps early
- Avoid suction-cup mats
- Store bottles off the bath
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
Places near Bellamore
What else we do in Bellamore
How it works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Work done at your home or business
- Every repair guaranteed for a year
Take a look at our full price list or bath cost comparison.
Covering Bellamore
Bellamore is about 7 miles west of Hereford, in Herefordshire. Jobs in Bellamore are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Bellamore is one of 255 places in Herefordshire we cover. Our jobs stretch from Bellamore to Birmingham (51 miles away).
We cover every part of HR2 and the streets around it. If you are just outside Bellamore, we cover Preston on Wye (1 mile north-west), Byford (1 mile north), Madley (2 miles south-east), Great Brampton (3 miles south-east) and Kingstone (3 miles south-east). We also work in nearby towns such as Hereford (7 miles east), Leominster (13 miles north-east), Redhill (7 miles east), Newton Farm (7 miles east), Whitecross (6 miles east) and Eign Hill (8 miles east).
Near you in Bellamore
Around Bellamore, we work in homes near Church of St Mary, among other places. Well-known places in the area include Wormhill Farm Museum (2.5 miles east) and Cublington Castle Farm (1.6 miles south-east). Green spaces nearby include Garnons Hill and Wyevale Wood.
When a repair is not the answer
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think.
Materials we work on in Bellamore
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
