East Riding of Yorkshire · England
Bath Re-enamelling in Bellasize
Bath re-enamelling in Bellasize without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
When we’d advise against a repair
Some jobs aren’t right for a repair, including:
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Bath re-enamelling in Bellasize, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s wear marks under the taps and a dull, rough surface that won’t come clean, we can help.
You get a one-year guarantee, the same in Bellasize as everywhere else we work.
- Location
- Bellasize (DN14)
- Region
- East Riding of Yorkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Bellasize: your questions answered
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
What happens after I send photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Are there extra charges for Bellasize?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Repairing versus replacing in Bellasize
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Usually one visit, start to finish
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
- Colour-matched on site
Read our full price list and bath cost comparison.
Aftercare tips
It’s all simple stuff:
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Nearby places to Bellasize
Other services in Bellasize
Where we work around Bellasize
Bellasize is about 6 miles north-east of Goole, in East Riding of Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 299 towns and villages in East Riding of Yorkshire. We work right across the region, from Bellasize to Leeds (33 miles away).
Our repair technicians cover all of the DN14 postcode area and the streets around it. Nearby, we also work in Bennetland (1 mile north), Greenoak (1 mile west), Gilberdyke (1 mile north-east), Scalby (1 mile north-east) and Sandholme (2 miles north). Further out, we also cover Beverley (15 miles north-east), Goole (6 miles south-west), Pocklington (13 miles north), Hessle (13 miles east), Cottingham (14 miles east) and Market Weighton (9 miles north).
What’s near Bellasize
Around Bellasize, we work in homes near The Cross Keys pub and Gilberdyke Primary School, among other places. The closest station to Bellasize is Gilberdyke station, about 0.9 miles north-east of the centre. Further afield, we also cover the area around Goole and District Hospital (5.4 miles west). For a walk, there is Blacktoft Sands RSPB reserve.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we’re done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Make sure the area is dry
How to get a price
Email us a picture of the damage and a wider shot of the entire item, and tell us you are in Bellasize, and we’ll come back with a fixed quote.
Related advice
Prices and what affects them
Prices start from £350. There is no area surcharge for Bellasize. What changes the price is:
- Unusual colours or finishes
- How many items we do on one visit
- Any earlier repairs that need removing first
- What kind of damage it is
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- Natural light rather than flash
- Any earlier repairs or coatings
- Something in shot to show the size
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
