East Riding of Yorkshire · England
Bath Re-enamelling in Gilberdyke
We travel to Gilberdyke for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- Enamel that’s lost its shine and feels rough
Our work in Gilberdyke
Gilberdyke is about 6 miles north-east of Goole, in East Riding of Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Gilberdyke is one of 299 towns and villages in East Riding of Yorkshire where we work. Our jobs stretch from Gilberdyke to Leeds (33 miles away).
We work across the HU15 postcode area. That includes homes on Station Road, Hansard Crescent and Sycamore Close. If you’re just outside Gilberdyke, we cover Scalby (1 mile north-east), Bennetland (1 mile south-west), Sandholme (1 mile north-west), Bellasize (1 mile south-west) and Hive (1 mile north-west). Within a short drive, we also cover Beverley (14 miles north-east), Goole (6 miles south-west), Pocklington (12 miles north), Hessle (12 miles east), Cottingham (13 miles east) and Market Weighton (8 miles north).
Local landmarks in Gilberdyke
Around Gilberdyke, we work in homes near Gilberdyke Primary School, Church of St Stephen and Wards Hotel and the streets around them. There’s a railway station in Gilberdyke itself: Gilberdyke station. Green spaces nearby include Blacktoft Sands RSPB reserve.
About our bath re-enamelling in Gilberdyke
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for chips and rust in more than one place and a bath that stays dull however much you clean it, across Victorian roll-tops, pressed steel baths and acrylic baths.
Every repair comes with our one-year guarantee.
- Location
- Gilberdyke (HU15)
- Region
- East Riding of Yorkshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairing versus replacing in Gilberdyke
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Fixed prices from your pictures
- Most jobs done in one visit
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
Read our full price list or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Access to the area
- What kind of damage it is
- How hard the colour is to match
- How many items we do on one visit
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- Any details about the material
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
When to call us in Gilberdyke
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Signs it’s time to call us include:
- A peeling or bubbling previous coating
- Wear marks under the taps
- Brown or grey marks that do not clean off
- A roll-top that is seen better days
Before booking anyone
- What happens if they find more damage
- If travel is included in the price
- What protection goes down before work starts
- Aftercare advice
What a repair cannot fix
A repair isn’t right for every job, for example:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Gilberdyke
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Questions from Gilberdyke
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
Which areas do you work in?
The whole UK, including all of East Riding of Yorkshire. Send your postcode with your pictures and we will offer you dates.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs in East Riding of Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How it works
We work cleanly and quietly. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
More services for Gilberdyke
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
