East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Beverley, East Riding of Yorkshire
Full bath re-enamelling and resurfacing in Beverley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A coating lifting around the plughole
What we are called out for in Beverley
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Clients usually contact us about:
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Chips and rust in more than one place
Before you book anyone
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- Whether a trained technician does the job
Bath re-enamelling in Beverley, done in place
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair pressed steel baths, acrylic baths and cast iron baths, and people most frequently call us about chips and rust in more than one place and a period or roll-top bath worth keeping.
Big or small, it’s backed by a one-year guarantee in Beverley and across East Riding of Yorkshire.
- Where
- Beverley (HU17)
- County
- East Riding of Yorkshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Beverley
What else we do in Beverley
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Doing more than one item at once
- The material and finish
- How hard the colour is to match
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A picture taken from further back
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why book with us
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
- Generally one visit, start to finish
- We leave the room as we found it
Take a look at our full price list and resurfacing vs replacement cost guide.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Beverley and nearby
Beverley is about 7 miles north-west of Kingston upon Hull, in East Riding of Yorkshire. Jobs in Beverley are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in all 299 towns and villages across East Riding of Yorkshire. You can also see our page for Leeds, about 46 miles away.
All of HU17 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Register Square, Wednesday Market and Saturday Market. Beverley is on the A164 and A1174, which makes it straightforward to reach. We also travel to Molescroft (1 mile north-west), Hull Bridge (2 miles north-east), Broadgate (2 miles south-west), Bentley (2 miles south-west) and Walkington (3 miles south-west). Further out, we also cover Driffield (11 miles north), Pocklington (15 miles north-west), Hessle (8 miles south), Cottingham (4 miles south), Hornsea (12 miles north-east) and Market Weighton (10 miles west). Beverley is one of the larger places we cover in East Riding of Yorkshire.
Local landmarks in Beverley
We visit homes around Beverley Masonic Hall, Beverley High School and Beverley St Nicholas Community Primary School, among other places. Nearby too are The Queens Head pub (within half a mile south-east) and Beverley Minster (under half a mile south-east). Beverley has its own railway station: Beverley station. Nearby you will also find East Riding Community Hospital (0.9 miles north-east) and Baynard Castle (4.1 miles south).
Common questions in Beverley
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Do you come to Beverley?
We do. We send a technician to Beverley for every job, and the price is the same as everywhere else.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
Related advice
Landlord and trade work in Beverley
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
