Lincolnshire · England
Bath Re-enamelling in Belmesthorpe
Our repair technicians come to Belmesthorpe for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
Bath re-enamelling at your home in Belmesthorpe
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on basins & shower trays, cast iron baths and Victorian roll-tops, and people most frequently call us about a roll-top that’s seen better days and lots of chips and rust spots.
All our work is covered by a one-year guarantee.
- Area
- Belmesthorpe (PE9)
- County
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Belmesthorpe
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- Several chips and rust patches
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- Who will actually do the work
- What happens if they find more damage
Repairing versus replacing in Belmesthorpe
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- We will tell you if it’s not worth repairing
- Free fixed quotes from pictures
- Nothing taken out or refitted
- Rooms protected and left tidy
See our prices page and guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Belmesthorpe. The price depends on:
- How much damage there is
- The colour and finish to match
- The material
- Previous DIY repairs that have to come out
Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Two or three clear pictures are generally enough. It helps if you send:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
How to get a price
Upload pictures of the damage and one of the entire item, with your PE9 postcode, and we will reply with a fixed price.
Read more
Also in Belmesthorpe
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Landlord and trade work in Belmesthorpe
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
About Belmesthorpe
Belmesthorpe is about 2 miles north-east of Stamford, in Lincolnshire. Wherever you are in the PE9 postcode area, a technician comes to you. We work in 732 places in Lincolnshire, from the larger towns to small villages. We work right across the region, from Belmesthorpe to Birmingham (62 miles away).
Postcode districts we cover here: PE9. We regularly work on streets such as Main Street, Belmesthorpe Lane and Castle Rise. Other places close to Belmesthorpe include Ryhall (1 mile north-west), Newstead (1 mile south), Uffington (2 miles south-east), Stamford (2 miles south-west) and Wothorpe (3 miles south). We also work in nearby towns such as Spalding (15 miles north-east), Bourne (7 miles north-east), Austerby (7 miles north-east), Market Deeping (6 miles east), Pinchbeck (15 miles north-east) and Paston (10 miles south-east).
What’s near Belmesthorpe
Locally, our jobs take us to homes close to Ryhall CofE Academy, The Blue Bell Inn and Stamford Welland Academy. For rail, the closest station is Stamford station, about 2.4 miles south. Nearby you’ll also find Essendine Castle (1.6 miles north) and Stamford Town Hall (2.2 miles south). Open spaces near Belmesthorpe include Barnack Hills & Holes National Nature Reserve.
- Other local spots include Stamford Baron St. Martin (2.3 miles south)
Belmesthorpe: your questions answered
Do you come to Belmesthorpe?
We do. We send a technician to Belmesthorpe for every job, with no extra charge for travel.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Are there extra charges for Belmesthorpe?
No. Our quotes include travel, and we charge the same wherever you are.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
What we can’t put right
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Belmesthorpe
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
