Lincolnshire · England
Bath re-enamelling & resurfacing in Pinchbeck, Lincolnshire
Problem with your bath in Pinchbeck? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Stains that will not shift
- A roll-top that is seen better days
Bath re-enamelling in Pinchbeck without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with a roll-top that’s seen better days and an outdated colour you’d like to change, we can help, on acrylic baths, Victorian roll-tops and pressed steel baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Pinchbeck (PE11)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why Pinchbeck customers choose us
- Colour mixed on the day to match
- Rooms protected and left tidy
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page and resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Pinchbeck?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
You may need us if you’ve spotted:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
What to look for in a quote
- How the colour is matched
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- Aftercare advice
Keeping it looking good
To keep it looking its best:
- Get any chip repaired quickly
- Don’t use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Store bottles off the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
About Pinchbeck
Pinchbeck is about 2 miles north of Spalding, in Lincolnshire. Clients in Pinchbeck get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We work in all 732 towns and villages across Lincolnshire. We work right across the region, from Pinchbeck to Birmingham (76 miles away).
All of PE11 is within our area. You’ll find streets such as Market Way, Independence Drive and St Mary's Avenue. You’ll find Pinchbeck on the B1180 and B1356, which makes it straightforward to reach. We also cover the places around Pinchbeck: Crossgate (1 mile north), Wykeham (2 miles east), Surfleet (2 miles north-east), Gosberton Cheal (2 miles north-west) and Surfleet Seas End (3 miles north-east). We also work in nearby towns such as Boston (13 miles north-east), Bourne (10 miles west), Holbeach (7 miles east), Austerby (9 miles west), Market Deeping (11 miles south-west) and Paston (15 miles south).
Local landmarks in Pinchbeck
Typical jobs here are in homes near The Pinchbeck East Church of England Primary School, Gleed Boys' School and Church of St Mary, among other places. Pinchbeck’s nearest station is Spalding station, roughly 1.6 miles south. Nearby you’ll also find The Spalding Bulb Museum (0.8 miles north).
Towns and villages near Pinchbeck
More services for Pinchbeck
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price depends on:
- How many items we do on one visit
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- The material
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
You can typically get a fixed price without us visiting. To help us price it:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A photo taken from further back
Upload a photo of the damage and one of the whole item, with your PE11 postcode, and we’ll reply with a fixed price.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
FAQs for Pinchbeck
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Which areas do you work in?
Across the UK, so Pinchbeck is covered. Our prices are the same everywhere.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
What a repair cannot fix
We would rather lose a job than do one that won’t last, so these are the limits:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a full day.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
