North Lincolnshire · England
Bath Re-enamelling for Beltoft homes
Full bath re-enamelling and resurfacing in Beltoft, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
Landlords, agents and businesses in Beltoft
For anyone letting property in or around Beltoft, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Bath re-enamelling in Beltoft without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair cast iron baths, Victorian roll-tops and acrylic baths, and the jobs we see most are a bath that stays dull however much you clean it and worn patches where water runs and sits.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Beltoft (DN9)
- County
- North Lincolnshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
Ask for a price
To get a price, send two or three pictures using our quote form or ring us. We will say straight away whether it can be repaired.
Related advice
Places near Beltoft
What else we do in Beltoft
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Doing more than one item at once
Our prices are the same across the UK, so there is no premium for Beltoft. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Two or three clear photos are typically enough. It helps if you send:
- Natural light rather than flash
- Where you are, by postcode
- A wider photo showing the whole bath
- A close-up of the damage, in focus
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Beltoft and nearby
Beltoft is about 5 miles west of Scunthorpe, in North Lincolnshire. Our technicians come to homes and businesses in Beltoft, so nothing has to leave your home. Our technicians cover 90 places across North Lincolnshire. Our nearest city page is Leeds, about 36 miles away.
All of DN9 is covered, from the main roads to the quietest streets. Neighbouring places we cover include West Butterwick (2 miles east), Derrythorpe (2 miles north-east), East Butterwick (2 miles east), Althorpe (2 miles north-east) and Burringham (3 miles north-east). Larger places within reach include Scunthorpe (5 miles east), Bottesford (5 miles east), Brigg (12 miles east), Frodingham (6 miles north-east), Crosby (6 miles north-east) and Broughton (10 miles east).
Around Beltoft
For rail, the closest station is Crowle station, roughly 3 miles north-west of the centre. Nearby you’ll also find Haywain Farm Museum (2.5 miles south-west) and Scunthorpe General Hospital (5.3 miles north-east).
When we’d advise against a repair
It helps to know what we can’t do too:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
What we’re called out for in Beltoft
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Look out for these signs:
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Several chips and rust patches
Before you book anyone
- How soon you can use it again
- What aftercare is recommended
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
FAQs for Beltoft
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you cover Beltoft?
We do. Repair technicians travel to Beltoft from across the region, with no extra charge for travel.
How to look after the repair
Simple care helps the repair last. Our advice:
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repairing versus replacing in Beltoft
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Beltoft
- Straight answers about what a repair can do
- One price list for the whole UK
- Everything repaired in place
- Dust sheets down, tidy finish
See our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
