North Lincolnshire · England
Bath Re-enamelling in Keadby
We travel to Keadby for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
About our bath re-enamelling in Keadby
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with a roll-top that’s seen better days and a peeling or bubbling previous coating, we can help, whatever the material.
Big or small, you get the same one-year guarantee.
- Where
- Keadby (DN17)
- Region
- North Lincolnshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep a parking space free if you can
- Open a window if you can
- Tell us about parking, stairs or access
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
When we would advise against a repair
A repair isn’t right for every job, including:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Your questions about bath re-enamelling in Keadby
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we will ask for another angle.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Covering Keadby
Keadby is about 4 miles west of Scunthorpe, in North Lincolnshire. Wherever you are in the DN17 postcode area, a technician comes to you. Keadby is one of 90 towns and villages in North Lincolnshire where we work. Our jobs stretch from Keadby to Leeds (36 miles away).
Every address in DN17 is within our area. We regularly work on streets such as Station Road, Woodgarr Avenue and Trent View. Nearby, we also work in Gunness (1 mile north-east), Althorpe (1 mile south), Burringham (1 mile south), Derrythorpe (1 mile south) and East Butterwick (3 miles south). We also work in nearby towns such as Scunthorpe (4 miles east), Barton-upon-Humber (14 miles north-east), Bottesford (4 miles south-east), Brigg (11 miles east), Frodingham (4 miles east) and Crosby (4 miles east).
Around Keadby
In Keadby, that means homes near The Barge Inn, Althorpe and Keadby Primary School and St Barnabas. Keadby has its own railway station: Althorpe station. Nearby you will also find Scunthorpe General Hospital (3 miles east).
Other services in Keadby
When to call us in Keadby
Often the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
The things clients normally mention when they call are:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
What your quote should include
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- Whether the price covers travel
- How the room is protected while they work
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Keadby. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- A fixed quote before you book
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
What affects the price in Keadby
Prices start from £350. We charge the same across the UK, including Keadby. The price reflects:
- How many items we do on one visit
- Previous DIY repairs that have to come out
- What the surface is made of
- Where the damage is and how we get to it
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from pictures
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Any earlier repairs or coatings
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
