Cornwall · England
Bath re-enamelling & resurfacing in Berepper, Cornwall
Problem with your bath in Berepper? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
Signs you need bath re-enamelling in Berepper
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Contact us if you’ve noticed any of these:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
Comparing quotes
- How to look after the finish
- Whether the colour is mixed to match
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
Bath re-enamelling in Berepper, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are a bath in a colour that no longer suits and worn patches where water runs and sits.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Berepper (TR12)
- Region
- Cornwall
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Colours mixed by hand to suit your surface
- One visit for most repairs
- Dust sheets down, tidy finish
- Technicians who travel to you, UK-wide
Read our pricing and guide to resurfacing and replacement costs.
Landlord and trade work in Berepper
If you manage property in Berepper, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Berepper. The price comes down to:
- How many areas need work
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- A wider photo showing the whole bath
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Details of any past repairs
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Nearby places to Berepper
Also in Berepper
Common questions in Berepper
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Which areas do you work in?
Across the UK. Prices do not change with location.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Avoid suction-cup mats
- Fix dripping taps quickly
- Do not leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the following day.
Getting ready for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Getting a price
Upload a picture of the damage and one of the entire item, with your TR12 postcode, and we will come back with a fixed quote.
Related advice
What we can’t put right
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Berepper
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
About Berepper
Berepper is about 3 miles south of Helston, in Cornwall. We visit homes and businesses in Berepper and nearby villages, so you do not need to take anything anywhere. We cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
Here we cover the TR12 postcode area. Close by, we cover Gunwalloe (1 mile south-west), Cury (2 miles south-east), White Cross (2 miles south-east), Cross Lanes (2 miles south-east) and Mullion (3 miles south-east). Larger places within reach include Falmouth (11 miles north-east), Camborne (11 miles north), Redruth (12 miles north), Penzance (13 miles west), Helston (3 miles north) and Hayle (11 miles north-west).
Near you in Berepper
Locally, our jobs take us to homes close to Gunwalloe Mission Room and Halzephron Inn, among other places. A little further out are The Marconi Centre (2.1 miles south) and Helston Castle (2.7 miles north). Open spaces near Berepper include The Loe and Goonhilly Downs.
About our accreditations · Every repair comes with a one-year guarantee.
