Cornwall · England
Bath Re-enamelling in Cury
Bath re-enamelling in Cury without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- An old resurfacing that is failing
About our bath re-enamelling in Cury
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Our repair technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and people most frequently call us about several chips and rust patches and thin, worn enamel in places.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Cury (TR12)
- County
- Cornwall
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Cury?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Send us a picture if you notice any of these:
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Stains that will not shift
Comparing quotes
- If travel is included in the price
- How long the guarantee is and what it covers
- How changes to the job are handled
- What aftercare is recommended
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What affects the price in Cury
Resurfacing from £350. We do not charge extra for travel to Cury. The price depends on:
- The material
- The colour and finish to match
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- One picture of the entire bath
- Your postcode, so we can check dates
- Any details about the material
- A close-up of the damage, in focus
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Your questions about bath re-enamelling in Cury
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Cury and the surrounding area
Cury is about 4 miles south of Helston, in Cornwall. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Cury is one of 644 towns and villages in Cornwall we cover.
Our repair technicians cover all of TR12 and the streets around it. Whether you live on Church Road, Parc Enys and Parknoweth or a nearby road, a technician can come to you. Neighbouring places we cover include White Cross (1 mile north-east), Cross Lanes (1 mile east), Mullion (1 mile south), Meaver (2 miles south) and Berepper (2 miles north-west). Within a short drive, we also cover Falmouth (10 miles north-east), Camborne (12 miles north), Redruth (13 miles north), Penzance (14 miles west), Helston (4 miles north) and Hayle (12 miles north-west).
What’s near Cury
Typical jobs here are in homes near St Corentine’s Church, Mullion School and Cury CofE Primary School and the streets around them. Nearby you’ll also find Helston Castle (4 miles north-west) and Helston Community Hospital (3.3 miles north). For a walk, there’s Goonhilly Downs and The Loe.
What happens on the day
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
Getting a price
Upload photos of the damage and one of the whole item, with your TR12 postcode, and we’ll come back with a fixed quote.
Related advice
Other services in Cury
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- One-year guarantee on every repair
- A fixed quote before you book
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
See our prices page or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
