Cornwall · England
Bath re-enamelling & resurfacing in White Cross, Cornwall
We travel to White Cross for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in White Cross
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s an old resurfacing that’s failing and several chips and rust patches, we can generally put it right, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- White Cross (TR12)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why choose Surface Doctor in White Cross
- Colour-matched on site
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- One price list for the entire UK
See our prices page or resurfacing vs replacement cost guide.
Our work in White Cross
White Cross is about 4 miles south of Helston, in Cornwall. From the centre of White Cross to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. White Cross is one of 644 places in Cornwall we cover.
Our visits in TR12 are booked in the same way as anywhere else. Nearby, we also work in Cury (1 mile south-west), Cross Lanes (1 mile east), Mullion (2 miles south), Meaver (2 miles south) and Berepper (2 miles north-west). We also work in nearby towns such as Falmouth (10 miles north-east), Camborne (12 miles north), Redruth (13 miles north), Penzance (14 miles west), Helston (4 miles north) and Hayle (12 miles north-west).
Around White Cross
We visit homes around Cury CofE Primary School, Mullion School and St Corentine’s Church, among other places. Other landmarks nearby include Helston Castle (4 miles north-west) and Helston Community Hospital (3.3 miles north-west). Green spaces nearby include Goonhilly Downs and The Loe.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Rinse off hair dye, oils and bath bombs immediately
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including White Cross. The price reflects:
- Access to the area
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- The colour and finish to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- A clear, close picture of the problem area
- A picture taken from further back
- Any details about the material
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Do you need bath re-enamelling in White Cross?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
These are the problems we are asked about most:
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
- A coloured bath you want in white
- An original cast iron bath that needs restoring
What to look for in a quote
- When it can be used again
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We clean up when we’re done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
What else we do in White Cross
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in White Cross
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
FAQs for White Cross
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
About our accreditations · Every repair comes with a one-year guarantee.
