Somerset · England

Bath Re-enamelling in Berkley

Fixed-price bath re-enamelling in Berkley and the surrounding area, typically in one visit.

  • Resurfacing from £350
  • Several chips and rust patches
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Berkley?

Work for landlords and builders

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

How we handle bath re-enamelling in Berkley

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, we can help, whatever the material.

Big or small, you get the same one-year guarantee.

Before and after: an old basin refinished to bright white
Location
Berkley (BA11)
County
Somerset
Cover
One year on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

About Berkley

Berkley is about 2 miles east of Frome, in Somerset. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Berkley is one of 640 towns and villages in Somerset we cover.

All of BA11 is covered. Nearby, we also work in Berkley Marsh (1 mile west), Standerwick (1 mile north-east), Chapmanslade (1 mile south-east), Beckington (2 miles north) and Short Street (2 miles east). We also work in nearby towns such as Midsomer Norton (9 miles west), Shepton Mallet (12 miles west), Radstock (8 miles north-west), Wincanton (14 miles south-west), Castle Cary (15 miles south-west) and Westfield (8 miles north-west).

Landmarks near Berkley

Our customers here include homes close to North Hill House School, Church of St Mary and Frome Flyer pub. Other local landmarks include Thoulstone Park (2 miles east) and Berkley Church of England First School (less than half a mile north-east). The closest station to Berkley is Frome station, roughly 1.8 miles south-west of the centre. Other landmarks nearby include The Woodland Heritage Museum (2.8 miles north-east) and Nunney Castle (4.9 miles south-west). For a walk, there is Orchardleigh Lake and Cley Hill.

Map of Berkley © OpenStreetMap contributors

What we do, step by step

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and we leave the room as we found it.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Before we arrive

  • Open a window if you can
  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Send photos for a quote

Read more

What we can’t put right

Not everything can be repaired, and we’d rather say so up front. We can’t fix:

  • Holes rusted through the metal
  • An acrylic bath that flexes badly underfoot
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

Do you need bath re-enamelling in Berkley?

The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Common reasons people in Berkley contact us include:

  • An original cast iron bath that needs restoring
  • Wear marks under the taps
  • A coating lifting around the plughole
  • Lots of chips and rust spots

Before booking anyone

  • What prep work is covered
  • What happens if the damage is worse than the pictures show
  • Is the price fixed, and does it include VAT?
  • How the colour is matched

10 questions to ask before you book

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Prices and what affects them

Prices start from £350. You won’t pay by the hour. The price is based on:

  • Unusual colours or finishes
  • Access to the area
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Phone pictures are fine, there is no need for anything special. Just ensure we can see:

  • Something in shot to show the size
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage

To get a price, send two or three pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Repair dripping taps early
  • Never use suction bath mats
  • Clean with a soft cloth and mild detergent
  • Keep toiletries on a shelf rather than in the bath

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Common questions in Berkley

Are there extra charges for Berkley?

Travel is included in the price, and we charge the same wherever you are.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

What does bath re-enamelling cost?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

How do I book?

Send photos through the quote form or call 0345 017 0787.

Can you redo someone else’s repair?

Yes, we frequently do. Removing the old work can add time, and that’s in the quote.

Do you come to Berkley?

Yes, we do. Repair technicians travel to Berkley from across the region, with no extra charge for travel.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.