Somerset · England
Bath re-enamelling & resurfacing in Radstock, Somerset
Damaged bath in Radstock? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- An outdated colour you’d like to change
Radstock and nearby
Radstock is about 7 miles north-west of Frome, in Somerset. We travel to homes and businesses in Radstock and the surrounding area, so there’s no workshop to go to. We cover 640 places across Somerset, from the larger towns to small villages.
We cover every part of the BA3 postcode area. From Wells Square, The Street and The Dring or a nearby road, we can come to you. Radstock is on the A362 and A367, so it’s easy for us to reach. We also travel to Westfield (1 mile east), Haydon (1 mile south-east), Writhlington (1 mile east), Midsomer Norton (1 mile west) and Lower Writhlington (1 mile east). Larger places within reach include Frome (7 miles south-east), Wells (10 miles south-west), Shepton Mallet (8 miles south-west), Glastonbury (15 miles south-west), Cheddar (14 miles west) and Castle Cary (14 miles south).
Near you in Radstock
We visit homes around St Nicholas CofE Primary, The Railway Public House and Parish Church of St Nicholas, among other places. Well-known places in the area include Paulton Memorial Hospital (1.8 miles west). The countryside around Radstock includes Stephen's Vale Nature Reserve and Lechmere Water.
Bath re-enamelling in Radstock, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on Victorian roll-tops, basins & shower trays and pressed steel baths, and people most often call us about chips and rust in more than one place and a peeling or bubbling previous coating.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Radstock (BA3)
- County
- Somerset
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
The work is clean and fairly quiet. We protect the area first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
Ask for a price
If you’re in Radstock and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
FAQs for Radstock
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Somerset.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Repair or replace in Radstock?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why book with us
- Work done at your home or business
- Typically one visit, start to finish
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
Read our prices page or resurfacing vs replacement cost guide.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Also in Radstock
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Radstock. The price comes down to:
- How easy the damage is to reach
- The colour and finish to match
- The material
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
Phone pictures are fine. Make sure they show:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- One picture of the entire bath
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Radstock as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
How the surface is treated afterwards matters:
- Repair dripping taps early
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
- Do not leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Honest limits
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
