Wiltshire · England

Bath Re-enamelling for Short Street homes

Full bath re-enamelling and resurfacing in Short Street, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Short Street

About our bath re-enamelling in Short Street

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a bath that stays dull however much you clean it and several chips and rust patches, we can help, whatever the material.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Location
Short Street (BA13)
Region
Wiltshire
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Signs you need bath re-enamelling in Short Street

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

The most common problems we’re called about are:

  • An old resurfacing that is failing
  • Stains that will not shift
  • A bath in a colour that no longer suits
  • Several chips and rust patches

Before booking anyone

  • Whether the colour is mixed to match
  • What aftercare is recommended
  • Is the price fixed, and does it include VAT?
  • Who turns up on the day

Our hiring checklist

What a repair can’t fix

Before you book, it’s worth knowing the limits:

  • Plumbing leaks, which need a plumber
  • A metal bath with a through crack
  • A poorly supported acrylic bath, until it’s firmed up

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops

How to look after the repair

A little care keeps the finish looking good. Our advice:

  • Keep toiletries on a shelf rather than in the bath
  • A quick wipe after use keeps limescale away
  • Clean with a soft cloth and mild detergent
  • Leave the bath for the full curing time before using it

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

Covering Short Street

Short Street is about 2 miles south-west of Westbury, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Short Street is one of 425 towns and villages in Wiltshire where we work.

Here we cover the BA13 postcode area. Neighbouring places we cover include Chapmanslade (1 mile south-west), Dilton Marsh (1 mile north-east), Hisomley (1 mile east), Old Dilton (1 mile east) and Corsley (2 miles south). We also work in nearby towns such as Trowbridge (6 miles north), Devizes (13 miles north-east), Melksham (10 miles north-east), Warminster (3 miles south-east), Corsham (13 miles north) and Bradford-on-Avon (8 miles north).

Around Short Street

Typical jobs here are in homes near Thoulstone Park, Dilton Marsh CofE Primary School and Church of Holy Trinity and the streets around them. The closest station to Short Street is Dilton Marsh station, roughly 1.3 miles north-east of the centre. A little further out are The Woodland Heritage Museum (2.2 miles north) and Motte and double ringwork east of Bishopstrow Farm (4.9 miles south-east). Not far away are Orchardleigh Lake and Cley Hill.

Map of Short Street © OpenStreetMap contributors

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Prices and what affects them

Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:

  • The type of damage
  • Whether we combine several jobs
  • The size and number of damaged areas
  • Previous DIY repairs that have to come out

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

Phone photos are fine. Just make sure we can see:

  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • A wider photo showing the whole bath

Email us pictures of the damage and a wider shot of the entire item, with your BA13 postcode, and we will reply with a fixed price.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a full day from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can usually be used the next day.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift
  • Have a window or extractor fan available

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Get a free quote

Related advice

Short Street: your questions answered

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Do you resurface freestanding baths?

Yes. Inside and out.

Do you work in Short Street?

Yes. We cover the whole UK and come to Short Street and the rest of Wiltshire. Send pictures and we will quote, or call 0345 017 0787.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

What happens once I’ve sent pictures?

You’ll get a fixed quote back. You’re under no obligation.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

Landlord and trade work in Short Street

If you manage property in Short Street, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Repair or replace in Short Street?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

What you get with us

  • Honest advice, even when it means no job
  • Work done at your home or business
  • No need to remove anything
  • Colour-matched on site

Take a look at our pricing and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.