Oxfordshire · England
Bath re-enamelling & resurfacing in Berrick Salome, Oxfordshire
Bath re-enamelling in and around Berrick Salome: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A coating lifting around the plughole
About our bath re-enamelling in Berrick Salome
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people contact us are chips and rust in more than one place and worn patches where water runs and sits.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Area
- Berrick Salome (OX10)
- Area hub
- Oxfordshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
Before booking, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Berrick Salome questions
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How long is the bath unusable?
One day for most baths, ready the next day. We give you timings with the quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Which areas do you work in?
Across the UK, so Berrick Salome is covered. Our prices are the same everywhere.
Do you cover Berrick Salome?
Yes, we do. We send a technician to Berrick Salome for every job, with no extra charge for travel.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Berrick Salome customers choose us
- Colour-matched on site
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- No need to remove anything
Read our prices page or bath cost comparison.
Berrick Salome and the surrounding area
Berrick Salome is about 7 miles east of Didcot, in Oxfordshire. From the centre of Berrick Salome to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Berrick Salome is one of 443 towns and villages in Oxfordshire where we work. You can also see our page for London, about 45 miles away.
Our technicians cover all of OX10. If you’re just outside Berrick Salome, we cover Great Holcombe (1 mile north-west), Warborough (1 mile west), Newington (2 miles north), Benson (2 miles south) and Shillingford (2 miles south-west). We also work in nearby towns such as Oxford (9 miles north-west), Didcot (7 miles west), Abingdon-on-Thames (8 miles west), Thame (9 miles north-east), Wantage (14 miles west) and Henley-on-Thames (12 miles south-east).
What’s near Berrick Salome
Typical jobs here are in homes near The Chequers pub and Church of St Helen, among other places. A little further out are Wallingford Castle (3 miles south) and Aston Martin Heritage Trust Museum (1.7 miles north-west). Not far away are Ewelme Watercress Beds and Wittenham Clumps.
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price depends on:
- The type of damage
- How hard the colour is to match
- Any earlier repairs that need removing first
- The material
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- Whether it’s been repaired or coated before
- A picture taken from further back
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Places near Berrick Salome
More services for Berrick Salome
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Do you need bath re-enamelling in Berrick Salome?
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Keep an eye out for these signs:
- Stains that will not shift
- Wear marks under the taps
- A roll-top that’s seen better days
- Lots of chips and rust spots
Comparing quotes
- Whether a trained technician does the job
- A fixed price, and whether VAT is included
- Aftercare advice
- Whether there are any call-out or travel charges
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Clear the area around the damage
- Let us know which floor the room is on
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
