Oxfordshire · England
Bath re-enamelling & resurfacing in Shillingford, Oxfordshire
Bath re-enamelling in Shillingford without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- An old resurfacing that is failing
- Staining under the taps and around the waste
FAQs for Shillingford
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you work in Shillingford?
Yes. We work across the UK and travel to Shillingford and the rest of Oxfordshire. Send pictures and we’ll quote, or call 0345 017 0787.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
How do I get a price for bath re-enamelling in Shillingford?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Bath re-enamelling at your home in Shillingford
We don’t move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, with the bath ready to use the following day. If you are dealing with a dull, rough surface that won’t come clean and lots of chips and rust spots, we can generally put it right, on cast iron baths, pressed steel baths and Victorian roll-tops alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Shillingford (OX10)
- County
- Oxfordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Shillingford
What else we do in Shillingford
Repair or replace in Shillingford?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Shillingford
- Most jobs done in one visit
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Read our prices page or resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Shillingford?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
What your quote should include
- The length of the guarantee and what it covers
- Whether the price covers travel
- What happens if the damage is worse than the pictures show
- Who will actually do the work
Where we work around Shillingford
Shillingford is about 5 miles east of Didcot, in Oxfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Shillingford is one of 443 towns and villages in Oxfordshire we cover. We work right across the region, from Shillingford to London (about 46 miles away).
Every address in OX10 is covered. Whether you live on Warborough Road, New Road and Hartley Close or anywhere nearby, we can come to you. We also cover the places around Shillingford: Warborough (1 mile north), Dorchester (1 mile north-west), Brightwell-cum-Sotwell (1 mile south-west), Benson (2 miles south-east) and Berrick Salome (2 miles north-east). Larger places within reach include Oxford (9 miles north-west), Didcot (5 miles west), Abingdon-on-Thames (7 miles north-west), Thame (11 miles north-east), Wantage (13 miles west) and Henley-on-Thames (12 miles south-east).
What’s near Shillingford
We visit homes around Wallingford School, St Laurence Church of England (A) School and Church of St Lawrence, among other places. Shillingford’s nearest station is Cholsey station, about 4.3 miles south. Other landmarks nearby include Aston Martin Heritage Trust Museum (1.9 miles north) and Brightwell Castle (1.7 miles south-west). Green spaces nearby include Ewelme Watercress Beds and Wittenham Clumps.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Make sure the room can be ventilated
- Let us know which floor the room is on
- Clear the area around the damage
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Work for landlords and builders
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
