Bristol · England
Bath re-enamelling & resurfacing in Berwick, Bristol
Local bath re-enamelling for Berwick: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Stains that won’t shift
Berwick: your questions answered
Can you repair something that’s been repaired before?
Normally, yes. The old repair comes out first, so mention it when you send photos.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How we handle bath re-enamelling in Berwick
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include lots of chips and rust spots and a period or roll-top bath worth keeping, across Victorian roll-tops, acrylic baths and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Berwick (BS10)
- County
- Bristol
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Also near Berwick
Also in Berwick
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How many areas need work
- Whether we combine several jobs
The price reflects the work involved, not where you live. You’ll see the full price before you book, with nothing added on the day.
Getting a price from pictures
You can take the photos on your phone. Make sure they show:
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Whether it’s been repaired or coated before
- Any details about the material
Send us photos of the damage and a wider shot of the entire item, with your BS10 postcode, and we will reply with a fixed price.
About Berwick
Berwick is about 4 miles west of Bradley Stoke, in Bristol. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We cover all 89 towns and villages in Bristol, from the larger towns to small villages. Our nearest city page is Birmingham, about 73 miles away.
Here we cover the BS10 postcode area. If you’re just outside Berwick, we cover Hallen (1 mile south-west), Compton Greenfield (1 mile north-east), Cribbs Causeway (1 mile east), Easter Compton (1 mile north-east) and Blaise Hamlet (1 mile south). Larger places within reach include Bristol (5 miles south), Montpelier (5 miles south-east), Easton (5 miles south-east), Bedminster (6 miles south), Cotham (5 miles south) and Canon's Marsh (6 miles south).
Around Berwick
Typical jobs here are in homes near Blaise High School, Church of All Saints and Blaise Castle Estate and the streets around them. The nearest railway station is Pilning station, roughly 2.1 miles north of the centre. Nearby you will also find The Mall (1.8 miles east) and Brentry Hospital (1.8 miles south-east). Open spaces near Berwick include Tarn Lake and Purdown.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Open a window if you can
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a repair cannot fix
In fairness, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Landlords, agents and businesses in Berwick
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Signs you need bath re-enamelling in Berwick
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Most people contact us when they notice something like this:
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Before booking anyone
- What aftercare is recommended
- How changes to the job are handled
- If travel is included in the price
- A fixed price, and whether VAT is included
How to look after the repair
After the repair has cured, a few habits help it last:
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Don’t leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
