Bristol · England
Bath Re-enamelling for Blaise Hamlet homes
We travel to Blaise Hamlet for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- An outdated colour you’d like to change
Bath re-enamelling at your home in Blaise Hamlet
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a period or roll-top bath worth keeping and chips and rust in more than one place, we can help, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Blaise Hamlet and across Bristol.
- Location
- Blaise Hamlet (BS10, BS11)
- County
- Bristol
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Blaise Hamlet
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Common problems we fix in Blaise Hamlet
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Clients usually contact us about:
- A coloured bath you want in white
- Stains that won’t shift
- Worn patches where water runs and sits
- Lots of chips and rust spots
What to look for in a quote
- What happens if the damage is worse than the pictures show
- A fixed quote, and whether VAT is included
- How your room will be protected
- How the colour is matched
Your questions about bath re-enamelling in Blaise Hamlet
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What happens next?
We review the pictures and send a fixed quote and the next dates we have.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why book with us
- No need to remove anything
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
Read our pricing or bath cost comparison.
Also near Blaise Hamlet
Also in Blaise Hamlet
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
How to get a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Do not leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs right away
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly.
Materials we work on in Blaise Hamlet
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Blaise Hamlet and the surrounding area
Blaise Hamlet is about 2 miles north-west of Henleaze, in Bristol. Jobs in Blaise Hamlet are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover 89 places across Bristol. You can also see our page for Birmingham, about 74 miles away.
We cover every part of BS10 and BS11 and the streets around it. Local streets include Hallen Road, Church Lane and Windmill Lane. Close by, we cover Henbury (1 mile south-east), Hallen (1 mile north-west), Lawrence Weston (1 mile west), Brentry (1 mile east) and Berwick (1 mile north). Further out, we also cover Bristol (4 miles south-east), Montpelier (4 miles south-east), Easton (4 miles south-east), Bedminster (5 miles south), Cotham (3 miles south-east) and Canon's Marsh (4 miles south).
What’s near Blaise Hamlet
Our customers here include homes close to Blaise Inn Public House, Blaise High School and Henbury Court Primary Academy. Nearby too are Kingsweston School (1.3 miles south-west), Blaise Castle Estate (within half a mile south-west) and St Mary's Church (under half a mile east). For rail, the closest station is Sea Mills station, roughly 2 miles south of the centre. Well-known places in the area include Brentry Hospital (1 mile east) and The Mall (2.1 miles north-east). Open spaces near Blaise Hamlet include Tarn Lake and Portbury Ashlands.
About our accreditations · Every repair comes with a one-year guarantee.
