Solihull · England

Bath Re-enamelling in Bickenhill

Fixed-price bath re-enamelling in Bickenhill and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • Brown or grey marks that don’t clean off
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Bickenhill homes

Bath re-enamelling in Bickenhill, done in place

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on basins & shower trays, pressed steel baths and acrylic baths, and common reasons people get in touch are staining under the taps and around the waste and a coloured bath you want in white.

The work is covered for a year after we finish. Just call us if there is a problem and we will come back.

Where
Bickenhill (B92)
Area hub
Solihull
Warranty
12 months on all our work
Price
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Bickenhill questions

What areas do you cover?

We cover the entire UK, including Bickenhill and the rest of Solihull. Just include your postcode and we’ll confirm dates.

Can you redo someone else’s repair?

Yes, we frequently do. Removing the old work can add time, and that’s in the quote.

Does re-enamelling smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Do you cover Bickenhill?

Yes, we do. We send a technician to Bickenhill for every job, and the price is the same as everywhere else.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you quote from pictures?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

How do I book?

Send photos through the quote form or call 0345 017 0787, and we will take it from there.

Do you need bath re-enamelling in Bickenhill?

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

Signs it’s time to call us include:

  • An original cast iron bath that needs restoring
  • Lots of chips and rust spots
  • An outdated colour you’d like to change
  • Thin, worn enamel in places

Questions to ask before you book

  • Whether the price is fixed and includes VAT
  • Whether the price covers travel
  • Whether the colour is mixed to match
  • How soon you can use it again

10 questions to ask before you book

Prices and what affects them

Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:

  • What kind of damage it is
  • What the surface is made of
  • How easy the damage is to reach
  • Doing more than one item at once

We charge the same wherever you are, with no extra for Bickenhill. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed price

Good photos mean an accurate price. Here’s what we find most useful:

  • Any details about the material
  • Natural light rather than flash
  • Details of any past repairs
  • A coin beside the damage so we can judge size

To get a price, send two or three pictures through our quote form or ring us. We’ll say right away whether it can be repaired.

Why repair rather than replace?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • Technicians who travel to you, UK-wide
  • Most jobs done in one visit
  • Fixed prices from your photos
  • We leave the room as we found it

Read our full price list and guide to resurfacing and replacement costs.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

The process

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit
  • Open a window if you can

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.

Get a fixed price

Advice

What a repair can’t fix

It helps to know what we can’t do too:

  • Anything hidden under an old coating, until we remove it
  • A cast iron or steel bath that is cracked right through
  • A poorly supported acrylic bath, until it’s firmed up

If in doubt, send pictures and we will say what we think.

What we work on

  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops

Landlords, agents and businesses in Bickenhill

Landlords, letting agents and housing providers in Bickenhill use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.

Bickenhill and nearby

Bickenhill is about 4 miles north-east of Solihull, in Solihull. Customers in Bickenhill get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Bickenhill is one of 33 places in Solihull where we work. Our jobs stretch from Bickenhill to Birmingham (7 miles away).

Jobs in B92 work the same way as everywhere else we cover. Jobs here include addresses on Pitt Lane, Church Lane and Clock Lane and the roads around them. Being close to the B4438, Bickenhill is simple for us to get to. We also travel to Catherine-de-Barnes (1 mile south-west), Elmdon (1 mile west), Marston Green (2 miles north), Elmdon Heath (2 miles south-west) and Eastcote (2 miles south). Further out, we also cover Solihull (4 miles south-west), Monkspath (5 miles south-west), Knowle (4 miles south), Bentley Heath (4 miles south), Dorridge (5 miles south) and Dickens Heath (6 miles south-west).

Landmarks near Bickenhill

We visit homes around Elmdon Park and Church of Saint Peter and the streets around them. Bickenhill’s nearest station is Birmingham International station, about 0.7 miles north of the centre. Nearby you’ll also find Catherine-de-Barnes Isolation Hospital (1.9 miles south) and Bickenhill Castle Hills Farm (0.8 miles west). For a walk, there’s Yorks Wood and Shard End Lake.

Map of Bickenhill © OpenStreetMap contributors

How to care for the repair

How the surface is treated afterwards matters:

  • Never use suction bath mats
  • Stick to gentle, non-abrasive cleaners
  • A quick wipe after use keeps limescale away
  • Get any chip repaired quickly

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.