Aberdeen · Scotland
Bath re-enamelling & resurfacing in Bieldside, Aberdeen
We travel to Bieldside for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Bieldside
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for a period or roll-top bath worth keeping and thin, worn enamel in places, on pressed steel baths, Victorian roll-tops and cast iron baths.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Bieldside (AB15)
- County
- Aberdeen
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Bieldside
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Bieldside.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Places near Bieldside
What else we do in Bieldside
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Avoid suction-cup mats
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Bieldside. The price comes down to:
- Any earlier repairs that need removing first
- What kind of damage it is
- The colour and finish to match
- Doing more than one item at once
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- Natural light rather than flash
- One picture of the whole bath
- Any earlier repairs or coatings
- A clear, close picture of the problem area
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Landlords, agents and businesses in Bieldside
We carry out planned and one-off repairs for housing associations and facilities teams in Aberdeen and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Signs you need bath re-enamelling in Bieldside
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Typical reasons for a call-out include:
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- Stains that will not shift
What to look for in a quote
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- Aftercare advice
- How changes to the job are handled
Our work in Bieldside
Bieldside is about 4 miles south-west of Aberdeen, in Aberdeen. Customers in Bieldside get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 63 places across Aberdeen.
Here we cover the AB15 postcode area. Jobs here include addresses on Bieldside Station Road, Baillieswells Drive and Baillieswells Road. Close by, we cover Riverside of Blairs (1 mile south), Milltimber (1 mile west), Countesswells (2 miles north), Peterculter (3 miles west) and Kingswells (3 miles north). Within a short drive, we also cover Aberdeen (4 miles north-east), Rosemount (4 miles north-east), Berryden (4 miles north-east), Ferryhill (4 miles north-east), New Aberdeen (5 miles north-east) and Dyce (6 miles north).
Landmarks near Bieldside
Typical jobs here are in homes near Cults Academy, Hazlehead Park and Cults West Parish Church and the streets around them. Bieldside’s nearest station is Aberdeen station, roughly 4.4 miles north-east of the centre. Nearby you’ll also find Pitfoddels Castle (2 miles east) and Woodend Hospital (2.6 miles north-east). Not far away are Murtle Dam and Beans Hill.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- A fixed quote before you book
- No need to remove anything
- Colour-matched on site
- CHAS and Constructionline accredited
See our pricing or guide to resurfacing and replacement costs.
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to a full day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Keep children and pets away from the room on the day
- Make sure the room can be ventilated
- Ensure the area is dry
Get a quote
If you’re in Bieldside and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
