Aberdeen · Scotland
Bath Re-enamelling in Milltimber
Full bath re-enamelling and resurfacing at your home in Milltimber, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Bath re-enamelling in Milltimber without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s staining under the taps and around the waste and a period or roll-top bath worth keeping, we can usually put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Milltimber (AB13)
- Region
- Aberdeen
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Milltimber customers choose us
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
Read our prices page and bath cost comparison.
Questions from Milltimber
How long will the bath be out of use?
One day for most baths and can be used the day after. We give you timings with the quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do you come to Milltimber?
Yes. We work across the UK and come to Milltimber and the rest of Aberdeen. Send us pictures for a fixed quote, or call 0345 017 0787.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How do I get a price for bath re-enamelling in Milltimber?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
When a repair is not the answer
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Common problems we fix in Milltimber
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
The most common problems we’re called about are:
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
- Several chips and rust patches
- A dull, rough surface that will not come clean
Questions to ask before you book
- What the guarantee covers, and for how long
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
Aftercare tips
After the repair has cured, a few habits help it last:
- Clean with a soft cloth and mild detergent
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Also near Milltimber
What else we do in Milltimber
What affects the price in Milltimber
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- The material and finish
- How many items we do on one visit
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, so there is no premium for Milltimber. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- The material, if you know it
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Where we work around Milltimber
Milltimber is about 5 miles south-west of Aberdeen, in Aberdeen. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Milltimber is one of 63 places in Aberdeen where we work.
Our technicians cover all of the AB13 postcode area. Streets in the area include Station Road East, Station Road and Binghill Road West, all of which we cover. You’ll find Milltimber on the B979, so it’s easy for us to reach. If you’re just outside Milltimber, we cover Bieldside (1 mile east), Riverside of Blairs (1 mile south-east), Peterculter (1 mile south-west), Countesswells (2 miles north) and Kingswells (3 miles north). We also work in nearby towns such as Aberdeen (5 miles north-east), Rosemount (5 miles north-east), Berryden (5 miles north-east), Ferryhill (5 miles east), New Aberdeen (6 miles north-east) and Dyce (7 miles north).
Near you in Milltimber
Our clients here include homes close to Cults Academy, The Den and the Glen and International School of Aberdeen. Well-known places in the area include Woodend Hospital (3.5 miles north-east) and Blairs College (1.6 miles south-east). The countryside around Milltimber includes Portlethen Moss and Beans Hill.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
