Warwickshire · England
Bath re-enamelling & resurfacing in Bilton, Warwickshire
Full bath re-enamelling and resurfacing for homes and businesses in Bilton and across Warwickshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Bath re-enamelling in Bilton without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair basins & shower trays, Victorian roll-tops and cast iron baths, and common reasons people contact us are an outdated colour you’d like to change and thin, worn enamel in places.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Bilton (CV22, CV23, CV21)
- Area hub
- Warwickshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Bilton
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Which areas do you work in?
Everywhere in the UK, Bilton included. There’s no extra charge for travel.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
What we cannot put right
Before you book, it’s worth knowing the limits:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Bilton
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Signs you need bath re-enamelling in Bilton
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we’re called about are:
- Chips and rust in more than one place
- An old resurfacing that is failing
- Worn patches where water runs and sits
- A roll-top that’s seen better days
Questions to ask before you book
- What prep work is covered
- Whether a trained technician does the job
- How soon you can use it again
- How the room is protected while they work
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Nearby places to Bilton
What else we do in Bilton
What happens on the day
We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes the best part of a day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Ensure the room can be ventilated
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Our work in Bilton
Bilton is about 1 mile west of Rugby, in Warwickshire. We travel to customers in Bilton and nearby villages, so you do not need to take anything anywhere. We work in all 324 towns and villages in Warwickshire. We work right across the region, from Bilton to Birmingham (about 26 miles away).
Here we cover the CV22, CV23 and CV21 postcode area. Local streets include May Lane, David Road and Evans Road, and we cover them all. We also travel to New Bilton (1 mile north-east), Rugby (1 mile east), Dunchurch (2 miles south), Newbold-on-Avon (2 miles north) and Toft (2 miles south). Further out, we also cover Nuneaton (13 miles north-west), Warwick (13 miles south-west), Royal Leamington Spa (11 miles south-west), Bedworth (11 miles north-west), Leamington Spa (12 miles south-west) and Kenilworth (12 miles west).
Local landmarks in Bilton
Typical jobs here are in homes near Bilton School, Henry Hinde Infant School and The Crescent School. The closest station to Bilton is Rugby station, roughly 1.9 miles north-east. Further afield, we also cover the area around Webb Ellis Rugby Football Museum (1.1 miles north-east) and Clock Towers Shopping Centre (1.3 miles north-east). The countryside around Bilton includes Hensborough Hill and Newbold Quarry Park.
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs right away
- Repair dripping taps early
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Landlords, agents and businesses in Bilton
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
- One price list for the whole UK
- Free fixed quotes from pictures
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
