Warwickshire · England

Bath and surface repairs in CV22

Repairs and resurfacing across CV22, from Bilton, Cawston and New Bilton. Fixed prices from photos and a one-year guarantee.

Book a repair in CV22

Bath repair across CV22: what to expect

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Common call-outs are for damage beneath the taps and rust spots around the plughole, in whirlpool & spa baths, pressed steel enamel and acrylic.

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

Prices in CV22

Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for CV22. The job itself decides the price: how much damage, what it’s made of and how many items.

Why choose Surface Doctor

  • We leave the room as we found it
  • One-year guarantee on every repair
  • Repair technicians who travel to you, UK-wide
  • Free fixed quotes from pictures

Ask for a price

If you’re in CV22 and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Landmarks near Bilton

Typical jobs here are in homes near Bilton School, Henry Hinde Infant School and The Crescent School and the streets around them. For rail, the closest station is Rugby station, roughly 1.9 miles north-east of the centre. Nearby you’ll also find Webb Ellis Rugby Football Museum (1.1 miles north-east) and Clock Towers Shopping Centre (1.3 miles north-east). Not far away are Hensborough Hill and Newbold Quarry Park.

What affects the price in CV22

Prices start from £95. A fixed quote means you know the cost before booking. We look at:

  • How many items we do on one visit
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • The material and finish

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.

Why repair rather than replace?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place.

Comparing quotes

  • What happens if they find more damage
  • Whether a trained technician does the job
  • Whether the colour is mixed to match
  • Is the price fixed, and does it include VAT?

For landlords and businesses

We work for landlords, letting agents and housing providers in CV22 as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Don’t scrub with anything abrasive
  • Check that an acrylic bath does not move when you stand in it
  • Keep metal cans and razors off the surface
  • Cover the bath during DIY or decorating

There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

CV22 questions

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can you repair something that’s been repaired before?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Can I get a quote without a visit?

Usually, yes. Clear photos let us give you a fixed quote without visiting.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Do you work in CV22?

We do. Technicians travel to CV22 from across the region, with no extra charge for travel.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.