Nottinghamshire · England
Bath re-enamelling & resurfacing in Bingham, Nottinghamshire
Bath re-enamelling for Bingham, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Repair or replace in Bingham?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Bingham. The job itself decides the price: the material, the amount of damage and how many items.
Why Bingham clients choose us
- Rooms protected and left tidy
- A fixed quote before you book
- Colour mixed on the day to match
- Most jobs done in one visit
See our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Bingham, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s enamel that’s lost its shine and feels rough and a roll-top that’s seen better days, we can typically put it right, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Where
- Bingham (NG13)
- Area hub
- Nottinghamshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Bingham
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Our work in Bingham
Bingham is about 6 miles east of Carlton, in Nottinghamshire. Jobs in Bingham are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover all 329 towns and villages across Nottinghamshire. Our jobs stretch from Bingham to Birmingham (about 51 miles away).
We work across the NG13 postcode area and the streets around it. Whether you live on Orchard Avenue, Porchester Road and Carnarvon Place or anywhere nearby, a technician can come to you. Bingham sits on or near the A52 and B692, so getting to you is simple. Other places close to Bingham include Newton (1 mile north-west), Cropwell Butler (2 miles south-west), East Bridgford (2 miles north), Car Colston (2 miles north-east) and Scarrington (3 miles north-east). Within a short drive, we also cover Beeston (11 miles west), Carlton (6 miles west), Hucknall (12 miles north-west), Newark-on-Trent (11 miles north-east), West Bridgford (7 miles west) and Netherfield (5 miles west).
Near you in Bingham
Our clients here include homes close to Church of St. Mary and All Saints, The White Lion pub and Robert Miles Infant School. For rail, the closest station is Bingham station, about 0.5 miles north-east. Further afield, we also cover the area around Radcliffe Asylum (1.8 miles west) and Shelford and Newton (2.4 miles north-west).
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Let us know which floor the room is on
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
What we can’t put right
Before booking, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Towns and villages near Bingham
Also in Bingham
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
Looking after it afterwards
How the surface is treated afterwards matters:
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
- Store bottles off the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Landlord and trade work in Bingham
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Bingham. The price comes down to:
- The type of damage
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The colour and finish to match
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
