Dorset · England
Bath Re-enamelling for Binnegar homes
Local bath re-enamelling for Binnegar: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Chips and rust in more than one place
How we handle bath re-enamelling in Binnegar
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We are frequently asked to fix thin, worn enamel in places and an original cast iron bath that needs restoring, across pressed steel baths, basins & shower trays and acrylic baths.
Big or small, you get the same one-year guarantee.
- Area
- Binnegar (BH20)
- Region
- Dorset
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Let us know which floor the room is on
- Ensure the area is dry
- Tell us about any previous repairs or coatings
How to get a price
Email us a photo of the damage and a wider shot of the whole item, and tell us you’re in Binnegar, and we’ll come back with a fixed quote.
Related advice
Also near Binnegar
More services for Binnegar
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About Binnegar
Binnegar is about 10 miles west of Poole, in Dorset. Jobs in Binnegar are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Binnegar is one of 462 towns and villages in Dorset we cover.
We cover every part of BH20. We also cover the places around Binnegar: East Stoke (1 mile south-west), Worgret (1 mile east), East Holme (1 mile south-east), Wareham (2 miles east) and Stoborough (3 miles east). Further out, we also cover Weymouth (14 miles west), Dorchester (12 miles west), Wimborne Minster (12 miles north-east), Blandford Forum (12 miles north), Ferndown (15 miles north-east) and Broadstone (9 miles north-east).
Around Binnegar
Our customers here include homes close to Parish Church of St Mary and The Purbeck School and the streets around them. The closest station to Binnegar is Wool station, roughly 2.2 miles west. Further afield, we also cover the area around Wareham Castle (2.5 miles east) and Wareham Community Hospital (2.3 miles east). The countryside around Binnegar includes Blue Pool and Hyde Hill.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Your questions about bath re-enamelling in Binnegar
How long is the bath unusable?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How do I book?
Use the quote form or ring 0345 017 0787.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Landlords, agents and businesses in Binnegar
We work for landlords, letting agents and housing providers in Binnegar as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- Typically one visit, start to finish
- Fixed prices from your pictures
- A year’s guarantee on all work
- Everything repaired in place
See our prices page or bath cost comparison.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Binnegar. The price comes down to:
- The material
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Access to the area
Our prices are the same across the UK, so there’s no premium for Binnegar. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
You can generally get a fixed price without us visiting. To make it quick:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
