Northumberland · England
Bath Re-enamelling in Birgham
Problem with your bath in Birgham? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Bath re-enamelling in Birgham without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Our repair technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are a roll-top that’s seen better days and an old resurfacing that’s failing.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Birgham (TD12)
- County
- Northumberland
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Birgham
For anyone letting property in or around Birgham, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Landlords, letting agents and housing providers in Birgham use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Nearby places to Birgham
Other services in Birgham
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Aftercare tips
Nothing complicated is needed:
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
How the visit works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a full day. Before we go, we’ll explain when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Clear the area around the damage
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Related advice
Signs you need bath re-enamelling in Birgham
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
People normally call us after spotting something like this:
- A peeling or bubbling previous coating
- Several chips and rust patches
- Wear marks under the taps
- A bath that stays dull however much you clean it
Questions to ask before you book
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- How soon you can use it again
- What happens if they find more damage
Birgham: your questions answered
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
How much does bath re-enamelling cost in Birgham?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you quote from pictures?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Birgham and the surrounding area
Birgham is about 15 miles south-west of Berwick-upon-Tweed, in Northumberland. Across the TD12 area, we carry out the work at your property. We work in 189 places across Northumberland. Our nearest city page is Edinburgh, about 40 miles away.
Every address in TD12 is covered. Whether you live on East Haugh and Treaty Park or a nearby road, a technician can come to you. Nearby, we also work in Wark (2 miles east), Scottish Borders (2 miles north-east), Eccles (2 miles north-west), Coldstream (3 miles east) and Leitholm (3 miles north). Further out, we also cover Berwick-upon-Tweed (15 miles north-east), Wooler (14 miles south-east), East Ord (14 miles north-east) and Spittal (15 miles north-east).
Landmarks near Birgham
Locally, our jobs take us to homes close to Church of St Cuthbert and the streets around them. Well-known places in the area include Bite-about Pele (4.7 miles north) and Hirsel Homestead Museum & Craft Centre (2.4 miles north-east). Not far away are Hoselaw Loch and Din Moss and Lake of the Hirsel.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly before booking.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
What bath re-enamelling costs
Prices start from £350. We do not charge extra for travel to Birgham. The price depends on:
- How many items we do on one visit
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- A picture taken from further back
- The material, if you know it
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
