Cornwall · England
Bath re-enamelling & resurfacing in Bissoe, Cornwall
Full bath re-enamelling and resurfacing in Bissoe, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A roll-top that is seen better days
What we are called out for in Bissoe
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Look out for any of the following:
- Staining under the taps and around the waste
- Wear marks under the taps
- An old resurfacing that is failing
- An outdated colour you’d like to change
Before booking anyone
- What aftercare is recommended
- What happens if they find more damage
- The length of the guarantee and what it covers
- Whether they match the colour on site
How we handle bath re-enamelling in Bissoe
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We are frequently asked to fix enamel that’s lost its shine and feels rough and worn patches where water runs and sits, on pressed steel baths, basins & shower trays and acrylic baths.
Big or small, it’s backed by a one-year guarantee in Bissoe and across Cornwall.
- Location
- Bissoe (TR4, TR3)
- Area hub
- Cornwall
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Bissoe
Bissoe is about 4 miles south-west of Truro, in Cornwall. Whether you are in the middle of Bissoe or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 644 towns and villages in Cornwall.
All of TR4 and TR3 is covered. Jobs here include addresses on Grenna Lane and Bissoe Hill. Nearby, we also work in Hick's Mill (1 mile south-west), Greenwith Common (1 mile south), Coombe (1 mile west), Cusgarne (1 mile south-west) and Perranwell (1 mile south). Further out, we also cover Truro (4 miles north-east), Newquay (13 miles north), Falmouth (6 miles south), Camborne (8 miles west), Redruth (5 miles west) and Helston (11 miles south-west).
Near you in Bissoe
Locally, our jobs take us to homes close to Richard Lander School, Cusgarne Primary School and Baldhu Methodist Church And Sunday School. The nearest railway station is Perranwell station, about 1 mile south. Other landmarks nearby include Royal Cornwall Hospital (2.8 miles north-east) and Museum of Cornish Methodism (2.6 miles west). Green spaces nearby include Daubuz Moors.
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Make sure the area is dry
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Related advice
Prices and what affects them
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How easy the damage is to reach
- How much damage there is
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
How to get a fixed quote
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Bissoe. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Rooms protected and left tidy
- Same prices wherever you are
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
See our prices page and resurfacing vs replacement cost guide.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Don’t use the bath until it has fully cured
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
- Do not let dyes or oils sit on the finish
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For anyone letting property in or around Bissoe, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Bissoe
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Questions from Bissoe
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you cover Bissoe?
We do. We send a technician to Bissoe for every job, and the price is the same as everywhere else.
Which areas do you work in?
We work UK-wide. Prices don’t change with location.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Towns and villages near Bissoe
More services for Bissoe
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
