West Lothian · Scotland
Bath re-enamelling & resurfacing in Blackburn, West Lothian
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Blackburn. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Wear marks under the taps
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Blackburn. The price comes down to:
- How many items we do on one visit
- How hard the colour is to match
- How many areas need work
- Where the damage is and how we get to it
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- The material, if you know it
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Bath re-enamelling at your home in Blackburn
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. If you’re dealing with a coloured bath you want in white and stains that won’t shift, we can help, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Blackburn (EH47)
- Region
- West Lothian
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Blackburn
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Customers usually contact us about:
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
What to look for in a quote
- How your room will be protected
- Aftercare advice
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Landlords, agents and businesses in Blackburn
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Get a quote
For a price in Blackburn, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Places near Blackburn
Also in Blackburn
About Blackburn
Blackburn is about 2 miles south of Bathgate, in West Lothian. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Blackburn is one of 58 towns and villages in West Lothian where we work. Our jobs stretch from Blackburn to Edinburgh (about 17 miles away).
Jobs in EH47 are booked in the same way as anywhere else. Jobs here include addresses on East Main Street, West Main Street and Sycamore Walk. Blackburn is on the A705 and B792, so it’s easy for us to reach. Neighbouring places we cover include East Whitburn (2 miles west), Stoneyburn (2 miles south), Bathgate (2 miles north), Addiewell (2 miles south) and Addiebrownhill (2 miles south). Further out, we also cover Livingston (4 miles east), Linlithgow (7 miles north), Whitburn (3 miles west), East Calder (7 miles east), Broxburn (7 miles north-east) and Armadale (3 miles north-west).
Around Blackburn
Typical jobs here are in homes near Bathgate Academy and Blackburn. Blackburn’s nearest station is Bathgate station, roughly 1.7 miles north. Further afield, we also cover the area around Bennie Museum (2.2 miles north) and Tippethill House Hospital (2.5 miles west). Not far away are Dechmont Law.
What a repair can’t fix
A repair is not right for every job, including:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Blackburn
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Looking after it afterwards
So the finish stays in good condition:
- Wash away dyes and oils after use
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- Free fixed quotes from pictures
- Same prices wherever you are
- Colour mixed on the day to match
- Nothing taken out or refitted
Take a look at our full price list and guide to resurfacing and replacement costs.
Blackburn: your questions answered
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
About our accreditations · Every repair comes with a one-year guarantee.
