West Lothian · Scotland
Bath Re-enamelling in Livingston
Bath re-enamelling in and around Livingston: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that do not clean off
Bath re-enamelling in Livingston without replacing anything
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Our technicians work on Victorian roll-tops, acrylic baths and pressed steel baths, and common reasons people contact us are worn patches where water runs and sits and a coloured bath you want in white.
Big or small, it’s backed by a one-year guarantee in Livingston and across West Lothian.
- Where
- Livingston (EH54, EH53)
- Area hub
- West Lothian
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Livingston. The price depends on:
- How much damage there is
- How many items we do on one visit
- The type of damage
- Whether old repairs or coatings need taking off
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Quotes from your pictures
You can take the photos on your phone. Just make sure we can see:
- Details of any past repairs
- Something in shot to show the size
- Any details about the material
- One sharp close-up of the damage
For a price in Livingston, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
What we do, step by step
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we’ll tell you if anything changes.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Getting a price
Most clients in Livingston get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Also in Livingston
Work for landlords and builders
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
If you manage property in Livingston, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
What we cannot put right
A repair isn’t right for every job, including:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Livingston
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
When to call us in Livingston
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Customers usually contact us about:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- Staining under the taps and around the waste
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Who will actually do the work
- Whether the colour is mixed to match
- When it can be used again
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Repair or replace in Livingston?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Why us?
- No extra charge for your area
- Everything repaired in place
- We leave the room as we found it
- We come to you, anywhere in the UK
See our prices page or resurfacing vs replacement cost guide.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Your questions about bath re-enamelling in Livingston
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you cover the whole of West Lothian?
All of West Lothian, and the rest of the UK. There’s no extra charge for travel.
How much does bath re-enamelling cost in Livingston?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item with your EH54 postcode.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Livingston and nearby
Livingston is about 13 miles west of Edinburgh, in West Lothian. Anywhere in EH54, a technician comes to you. Livingston is one of 58 places in West Lothian we cover. We work right across the region, from Livingston to Edinburgh (about 13 miles away).
Our visits in EH54 and EH53 work the same way as everywhere else we cover. Jobs here include addresses on Main Street, Owen Square and Beveridge Square. You will find Livingston on the A71 and A89, which makes it straightforward to reach. Neighbouring places we cover include Howden (1 mile south), Ladywell (1 mile north-west), Livingston Village (1 mile south-west), Eliburn (1 mile west) and Dedridge (1 mile south). Larger places within reach include Bathgate (5 miles west), Linlithgow (7 miles north-west), Whitburn (7 miles west), East Calder (3 miles east), Broxburn (3 miles north-east) and Armadale (7 miles west). Being one of West Lothian’s larger places, Livingston is somewhere we visit often.
What’s near Livingston
Locally, our jobs take us to homes close to Inveralmond Community High School, St. Margaret's Academy and The NewYearField pub and the streets around them. Livingston’s nearest station is Livingston North station, about 1.1 miles north-west. Nearby you will also find Almond Valley Heritage Centre (1.3 miles south-west) and St John's Hospital (under half a mile south-west). The countryside around Livingston includes Dechmont Law.
About our accreditations · Every repair comes with a one-year guarantee.
