Somerset · England

Bath re-enamelling & resurfacing in Blackford, Somerset

Our repair technicians come to Blackford for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Blackford

For landlords and businesses

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Bath re-enamelling in Blackford without replacing anything

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix a bath that stays dull however much you clean it and brown or grey marks that don’t clean off, on pressed steel baths, cast iron baths and Victorian roll-tops.

All of our repairs are guaranteed for twelve months in Blackford and everywhere else. We return to put right any problem with the work.

Technician in a mask working on a freestanding roll-top bath
Area
Blackford (BA22, BA9)
Region
Somerset
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Keeping it looking good

So the finish stays in good condition for years:

  • Dry the bath after use to stop limescale
  • Use washing-up liquid and a soft cloth
  • A dripping tap should be fixed promptly
  • Have chips seen to early

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Repair or replace: which is better?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before you book.

Why Blackford customers choose us

  • A year’s guarantee on all work
  • CHAS, Constructionline and SafeContractor accredited
  • Repair technicians who travel to you, UK-wide
  • Fixed prices from your pictures

See our full price list and resurfacing vs replacement cost guide.

What we’re called out for in Blackford

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

Send us a photo if you notice any of these:

  • A coating lifting around the plughole
  • An original cast iron bath that needs restoring
  • Several chips and rust patches
  • A bath that stays dull however much you clean it

Comparing quotes

  • Whether there are any call-out or travel charges
  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • Whether they match the colour on site

10 questions to ask before booking

What we cannot put right

To be straight with you, there are a few things a repair won’t fix:

  • A bath split right through the body
  • Acrylic that moves when you stand in it
  • Leaks from fittings rather than the bath

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

Blackford: your questions answered

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Will the new finish last?

Look after it and it lasts. Gentle cleaning, no suction mats.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that is in the quote.

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

The process

There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to most of the day.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s normally ready the next day.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Mention any parking restrictions or tricky access
  • Have a window or extractor fan available

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.

Send pictures for a quote

Read more

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

About Blackford

Blackford is about 6 miles north of Sherborne, in Somerset. Whether you are in the middle of Blackford or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Blackford is one of 640 places in Somerset where we work.

We cover every part of BA22 and BA9 and the streets around it. Neighbouring places we cover include Holton (2 miles east), Yarlington (2 miles north), Charlton Horethorne (2 miles south), North Cheriton (2 miles east) and Bratton Seymour (3 miles north-east). Within a short drive, we also cover Yeovil (9 miles south-west), Frome (15 miles north-east), Wells (14 miles north-west), Shepton Mallet (11 miles north), Street (13 miles north-west) and Glastonbury (13 miles north-west).

Around Blackford

Typical jobs here are in homes near Church of St Michael, among other places. The nearest railway station is Templecombe station, about 3.8 miles south-east. Nearby you will also find Haynes Motor Museum (3.1 miles west).

Map of Blackford © OpenStreetMap contributors

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.