Derbyshire · England
Bath re-enamelling & resurfacing in Blackfordby, Derbyshire
Problem with your bath in Blackfordby? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- Chips and rust in more than one place
Bath re-enamelling in Blackfordby without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Whether it’s an outdated colour you’d like to change and stains that won’t shift, we can generally put it right.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Blackfordby (DE11)
- County
- Derbyshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
It’s all simple stuff:
- Wash away dyes and oils after use
- Never use suction bath mats
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Blackfordby. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Blackfordby
- Honest advice, even when it means no job
- One visit for most repairs
- Everything repaired in place
- Colour-matched on site
Take a look at our pricing and bath cost comparison.
About Blackfordby
Blackfordby is about 2 miles north-west of Ashby-de-la-Zouch, in Derbyshire. Clients in Blackfordby get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover 532 places across Derbyshire, from the larger towns to small villages. You can also see our page for Birmingham, about 25 miles away.
Our visits in DE11 are booked in the same way as anywhere else. From Main Street, Elstead Lane and Strawberry Lane or a nearby road, we can come to you. Close by, we cover Boundary (1 mile north-east), Woodville (1 mile north-west), Moira (1 mile south), Albert Village (1 mile west) and Spring Cottage (2 miles south-west). We also work in nearby towns such as Long Eaton (13 miles north-east), Upper Midway (3 miles north-west), Sandiacre (15 miles north-east), Hilton (9 miles north-west), Measham (4 miles south) and Melbourne (6 miles north-east).
Near you in Blackfordby
Around Blackfordby, we work in homes near Parish Church of St Margaret of Antioch, Blackfordby St Margaret's Church of England Primary School and Granville Community School, among other places. Other landmarks nearby include Burton upon Trent Infirmary (5.9 miles north-west) and Ashby Castle and associated formal garden (2.2 miles south-east).
Landlord and trade work in Blackfordby
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Open a window if you can
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
What affects the price in Blackfordby
Resurfacing from £350. There’s no area surcharge for Blackfordby. What changes the price is:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- Something in shot to show the size
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Your postcode, so we can check dates
To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Towns and villages near Blackfordby
Other services in Blackfordby
When to call us in Blackfordby
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- Thin, worn enamel in places
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
Questions to ask before you book
- How the room is protected while they work
- Aftercare advice
- How long the guarantee is and what it covers
- How long it needs to cure
Your questions about bath re-enamelling in Blackfordby
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
What happens after I send pictures?
We come back with a fixed price, generally with dates to choose from. You are under no obligation.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
