Bridgend · Wales
Bath Re-enamelling for Blackmill homes
Full bath re-enamelling and resurfacing in Blackmill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
What a repair can’t fix
We will not take on work that won’t last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
About our bath re-enamelling in Blackmill
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s enamel that’s lost its shine and feels rough and a bath in a colour that no longer suits, we can help.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Blackmill (CF35)
- Region
- Bridgend
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
So the finish stays in good condition:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs immediately
- Have chips seen to early
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
What happens on the day
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Blackmill and the surrounding area
Blackmill is about 5 miles north of Bridgend, in Bridgend. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover all 91 towns and villages across Bridgend, from the larger towns to small villages.
Jobs in CF35 work the same way as everywhere else we cover. From Graig Terrace, Cwm Felin and Old Parish Road or a nearby road, a technician can come to you. We also cover the places around Blackmill: Glynllan (1 mile east), Pant-yr-Awel (1 mile north-west), Lewistown (1 mile north), Hoel-laethog (1 mile south) and Llangeinor (1 mile west). Further out, we also cover Bridgend (5 miles south), Maesteg (6 miles north-west), Porthcawl (9 miles south-west), Newcastle Higher (5 miles south-west), Ynysawdre (3 miles south-west) and Pencoed (3 miles south-east).
Local landmarks in Blackmill
Our clients here include homes close to Church Of St Cein and Ogmore Junction pub. The nearest railway station is Tondu station, roughly 3 miles south-west. Other landmarks nearby include Ynysawdre Mound (2.9 miles south-west) and Designer Outlet Bridgend (3.2 miles south-west). Green spaces nearby include Mynydd-y-Gaer.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Nearby places to Blackmill
Also in Blackmill
What we’re called out for in Blackmill
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Clients generally contact us about:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Before booking anyone
- The length of the guarantee and what it covers
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
FAQs for Blackmill
What happens next?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How much does bath re-enamelling cost in Blackmill?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Are there extra charges for Blackmill?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Repairing versus replacing in Blackmill
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why book with us
- Straight answers about what a repair can do
- One-year guarantee on every repair
- Same prices wherever you are
- A fixed quote before booking
See our full price list or bath cost comparison.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What affects the price in Blackmill
Prices start from £350. You won’t pay by the hour. The price depends on:
- What the surface is made of
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- Details of any past repairs
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
