Bridgend · Wales
Bath re-enamelling & resurfacing in Heol-y-Cyw, Bridgend
Bath re-enamelling across Heol-y-Cyw and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Why Heol-y-Cyw clients choose us
- Nothing taken out or refitted
- One-year guarantee on every repair
- Fixed prices from your photos
- Colour mixed on the day to match
See our pricing or guide to resurfacing and replacement costs.
Bath re-enamelling in Heol-y-Cyw without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with a dull, rough surface that won’t come clean and thin, worn enamel in places, we can help, whatever the material.
A one-year guarantee comes as standard.
- Area
- Heol-y-Cyw (CF35)
- Region
- Bridgend
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Heol-y-Cyw
Also in Heol-y-Cyw
How the visit works
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Signs you need bath re-enamelling in Heol-y-Cyw
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Clients generally contact us about:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- Thin, worn enamel in places
Before booking anyone
- What preparation is included
- How the colour is matched
- Whether a trained technician does the job
- The length of the guarantee and what it covers
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What a repair cannot fix
We will not take on work that will not last, so these are the limits:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- What the surface is made of
- Whether old repairs or coatings need taking off
- The colour and finish to match
- The type of damage
The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
How to get a fixed price
We price nearly every job from pictures. This is what to send:
- Details of any past repairs
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
For anyone letting property in or around Heol-y-Cyw, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
About Heol-y-Cyw
Heol-y-Cyw is about 4 miles north-east of Bridgend, in Bridgend. Whether you’re in the middle of Heol-y-Cyw or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 91 towns and villages across Bridgend, from the larger towns to small villages.
We work across CF35 and the streets around it. You will find streets such as High Street, Heol y Nant and Waun Newydd, and we cover them all. We also cover the places around Heol-y-Cyw: Hoel-laethog (1 mile west), Pencoed (2 miles south-east), Blackmill (2 miles north), Glynllan (2 miles north) and Pen-yr-heol (2 miles south-west). We also work in nearby towns such as Bridgend (4 miles south-west), Maesteg (7 miles north-west), Porthcawl (9 miles south-west), Newcastle Higher (4 miles south-west), Ynysawdre (3 miles west) and Cefn Glas (4 miles south-west).
Near you in Heol-y-Cyw
Typical jobs here are in homes near Pencoed Comprehensive School and The Plough Inn, among other places. Heol-y-Cyw’s nearest station is Pencoed station, roughly 1.9 miles south-east of the centre. Other landmarks nearby include Parc Hospital (2.2 miles south-west) and Coity Castle (2.2 miles south-west). Not far away are Cefn Hirgoed.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Don’t let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
FAQs for Heol-y-Cyw
Can you quote from pictures?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
