Essex · England
Bath Re-enamelling for Blackmore homes
Damaged bath in Blackmore? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A roll-top that is seen better days
What we cannot put right
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Bath re-enamelling in Blackmore, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Whether it’s chips and rust in more than one place and a roll-top that’s seen better days, we can help, whatever the material.
Every repair comes with our one-year guarantee, wherever you are in Essex.
- Area
- Blackmore (CM4)
- County
- Essex
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a full day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Before we arrive
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Nearby places to Blackmore
More services for Blackmore
Your questions about bath re-enamelling in Blackmore
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you cover Blackmore?
Yes, we do. We send a technician to Blackmore for every job, and the price is the same as everywhere else.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
What happens after I send photos?
You’ll get a fixed quote back. You are under no obligation.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Repair or replace in Blackmore?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Prices start from £350. Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Fixed prices from your pictures
- No need to remove anything
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
See our full price list and bath cost comparison.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Don’t let dyes or oils sit on the finish
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Blackmore. The price comes down to:
- What the surface is made of
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How many items we do on one visit
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Natural light rather than flash
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About Blackmore
Blackmore is about 5 miles north of Brentwood, in Essex. Jobs in Blackmore are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in 644 places in Essex, from the larger towns to small villages. Our nearest city page is London, about 22 miles away.
We work across the CM4 postcode area. From Jericho Place, Woollard Way and Fingrith Hall Lane or anywhere nearby, we can come to you. We also cover the places around Blackmore: Wyatt's Green (2 miles south), Beggar Hill (2 miles east), Green Street (2 miles south-east), Doddinghurst (2 miles south) and Swallows Cross (2 miles south). We also work in nearby towns such as Chelmsford (8 miles north-east), Basildon (10 miles south-east), Harlow (10 miles north-west), Brentwood (5 miles south), Billericay (6 miles south-east) and Rayleigh (14 miles south-east).
What’s near Blackmore
In Blackmore, that means homes near The Bull Inn, Blackmore Primary School and Church of St Laurence and the streets around them. The closest station to Blackmore is Ingatestone station, about 3.4 miles south-east. Other landmarks nearby include Brentwood Community Hospital (4.8 miles south) and Willingale Doe (3.9 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
