Essex · England
Bath re-enamelling & resurfacing in Mill Green, Essex
Our repair technicians come to Mill Green for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that do not clean off
Bath re-enamelling in Mill Green without replacing anything
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Common call-outs are for a peeling or bubbling previous coating and thin, worn enamel in places, in cast iron baths, basins & shower trays and pressed steel baths.
A one-year guarantee comes as standard.
- Where
- Mill Green (CM4)
- Area hub
- Essex
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
About Mill Green
Mill Green is about 5 miles north-west of Billericay, in Essex. Jobs in Mill Green are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We work in all 644 towns and villages across Essex. We work right across the region, from Mill Green to London (24 miles away).
Postcode districts we cover here: CM4. From Mill Green Road, Harding's Lane and Mapletree Lane or a nearby road, we can come to you. Neighbouring places we cover include Fryerning (1 mile south), Beggar Hill (1 mile west), Green Street (1 mile south-west), Ingatestone (1 mile south) and Swallows Cross (2 miles south-west). Within a short drive, we also cover Chelmsford (6 miles north-east), Basildon (9 miles south-east), Harlow (12 miles north-west), Brentwood (5 miles south-west), Maldon (14 miles east) and Canvey Island (15 miles south-east).
What’s near Mill Green
Around Mill Green, we work in homes near Ingatestone Infant School, Anglo European School and Church of St Mary the Virgin and the streets around them. The nearest railway station is Ingatestone station, about 1.4 miles south-east. Well-known places in the area include Willingale Doe (4.9 miles north-west) and Chelmsford and Essex Hospital (4.4 miles north-east). Not far away are Norsey Wood.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Generally one visit, start to finish
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Fixed prices from your photos
Read our full price list and bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Mill Green. The price comes down to:
- Previous DIY repairs that have to come out
- How many areas need work
- How easy the damage is to reach
- What the surface is made of
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- One picture of the whole bath
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
FAQs for Mill Green
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
How do I book?
Use the quote form or ring 0345 017 0787.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
How do I get a price for bath re-enamelling in Mill Green?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you come to Mill Green?
Yes, we do. We send a technician to Mill Green for every job, and the price is the same as everywhere else.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have a window or extractor fan available
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Places near Mill Green
More services for Mill Green
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Do you need bath re-enamelling in Mill Green?
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Look out for these signs:
- Wear marks under the taps
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
What your quote should include
- Who turns up on the day
- How your room will be protected
- If travel is included in the price
- Is the price fixed, and does it include VAT?
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
