Highland · Scotland
Bath Re-enamelling in Blackpark
Local bath re-enamelling for Blackpark: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Wear marks under the taps
Bath re-enamelling at your home in Blackpark
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include a peeling or bubbling previous coating and several chips and rust patches, in Victorian roll-tops, basins & shower trays and pressed steel baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Blackpark (IV49)
- Area hub
- Highland
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We take into account:
- Previous DIY repairs that have to come out
- What the surface is made of
- Access to the area
- How hard the colour is to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Two or three clear photos are usually enough. Try to include:
- A photo taken from further back
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Most customers in Blackpark get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Our work in Blackpark
Blackpark is in Highland. Wherever you are in the IV49 postcode area, we carry out the work at your property. Blackpark is one of 253 towns and villages in Highland where we work.
We cover every part of the IV49 postcode area. We regularly work on streets such as Lime Park, Cul a' Chuirn and Sraid Nicconnich. Other places close to Blackpark include An t-Àth Leathann (1 mile north-west), Harrapul (1 mile east), Corry (1 mile north-west), Kyleakin (7 miles east) and Kyle of Lochalsh (8 miles north-east). Remote and island addresses take a little more planning, so it’s best to call first.
Around Blackpark
Locally, our jobs take us to homes close to Skye and the streets around them. A little further out are Mackinnon Memorial Hospital (0.8 miles north-west). The countryside around Blackpark includes Loch an Droma Bhàin and Bheinn Shuardail.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Generally one visit, start to finish
- We leave the room as we found it
Take a look at our prices page and guide to resurfacing and replacement costs.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It typically takes the best part of a day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
Get a quote
Email us a picture of the damage and one of the whole item, with your IV49 postcode, and we’ll reply with a fixed quote.
Advice
Common problems we fix in Blackpark
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- A roll-top that’s seen better days
Before booking anyone
- Whether they match the colour on site
- What protection goes down before work starts
- How long the guarantee is and what it covers
- How long it needs to cure
Landlord and trade work in Blackpark
Housing associations and facilities teams use us for planned and reactive repairs in Highland and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We are used to working with agents and managing companies. Send the address, photos and access details.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Places near Blackpark
More services for Blackpark
Blackpark questions
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Blackpark.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you come to Blackpark?
Yes. We cover the entire UK and come to Blackpark. Send photos and we’ll quote, or call 0345 017 0787.
What happens next?
We review the pictures and send a fixed quote with dates.
Can you quote from photos?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and we will quote them together.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you cover the entire of Highland?
Across the UK. Our prices are the same everywhere.
About our accreditations · Every repair comes with a one-year guarantee.
